
Editing Features
Copying your Tapes to VHS Cassette
Source (Playing)
Palmcorder
A/V OUT
TV
(To View)
A/V Cable (Supplied)
VHF Connecting Cable (not supplied)
Recording:
VCR (Rear)
Audio In Video In
To Audio In
To Video In
Before you begin
•Connect both Palmcorder and VCR to their power sources.
•Connect the Palmcorder to a VCR as illustrated left.
•Turn ON both units.
•Set the recording VCR’s Input Signal Selector to LINE.
•Set the Palmcorder POWER to VCR.
1 Insert a pre-recorded tape
into the source (playing) Palmcorder and a blank tape, with record tab in place, into the target VCR (Recorder).
2Press (PLAY) on the Palmcorder. When the tape reaches the point you want to start dubbing, press PAUSE.
3 Place the VCR into REC/PAUSE mode. (See VCR manual.)
4 Simultaneously, press PAUSE on both units to begin copying.
5 Press STOP on both units when copying is completed.
Note
•For technical reasons, dubbing a tape may reduce its quality.
•If the Time Code is displayed in the EVF or LCD monitor, it cannot be reset.
•Only the DATE/TIME, when displayed, will be recorded on the tape.
Monitor with your TV
•Turn the TV ON and select its VCR channel (either CH3 or CH4).
•Set the VCR/TV Selector on the recording VCR to VCR.
CAUTION:
Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.
40 |
|
Forassistance, pleasecall: |