
Electronic Viewfinder/LCD Monitor Indications
Here are some of the basic indications which will appear on the Palmcorder EVF and LCD Monitor. Only Date and Time indications will be recorded onto the tape.
CAMERA/VCR Mode
a
g
h
b
c
d
e
f
a | Battery Remaining | FULL |
|
h Counter/Time Code
The indication switches as shown below when the desired “C. DISPLAY” mode is selected from the menu.
b Tape Remaining
EMPTY
(Menu OSD: pp. 60, 62)
LinearTime Counter Memory Counter
R0:30R1:00
R0:00 | R0:00 |
•It will take several seconds for the tape remaining indicator to operate after the tape starts moving.
c CINEMA Indication (Menu OSD: p. 59)
d Digital Zoom and other Digital Functions (Menu OSD: p. 59)
This display appears when the digital zoom function has been activated.
e Playback Effect (Menu OSD: p. 61) This display appears when SEPIA or B/W is selected in VCR menu.
f | Volume Display (p. 28) |
| The volume bar appears when the |
| volume of the |
| adjusted. |
g Tape Speed Indication
(Menu OSD: p. 59)
Indicates the tape speed (SP or LP).
Time Code
Memory Counter M 0:00.00
The Palmcorder will stop whenever it reaches the point where the counter was previously set to M 0:00.00 during audio dub, fast forward, or rewind.
Time Code 0h00m00s00f
The Palmcorder calculates and displays exactly where you are on any tape in terms of hours, minutes, seconds, and frames (30 frames = 1 second).
•This display cannot be reset.
IMPORTANT NOTE:
•Display must be set to ALL for MF, AE, W.BALANCE or BACK LIGHT indications to be displayed on the EVF or LCD Panel when selected.
•C.RESET does not work when C. DISPLAY is set to T.CODE.
For Your Information
63