Notes On Operations
Replacing the Bulb
1 Insert a rigid wire, such as an extended paper clip into point (A) and lift cover up.
(A)
2 Using Tweezers or
•Take unit to servicenter if you need assistance.
Before you begin
•Set POWER to OFF.
3 Replace bulb using a clean cloth or tissue. (Do not touch with fingers.)
4 Replace lens cover.
Note
• Handle bulb gently. Excessive force may cause bulb to crack.
DANGER:
Use only replacement bulb (PART NO. LSLL0028) supplied by Panasonic to reduce risk of fire. Handle new bulb with cloth or tissue as skin oils decrease bulb life. Remove lens cover and allow bulb to cool before replacing to avoid possible burn hazard.
Notice
This product has a fluorescent lamp that contains a small amount of mercury. It also contains lead in some components. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance:
<http://www.eiae.org.>
48 Forassistance, pleasecall:
