Using the DSP Modes
English
4.Adjust the effect level.
1)Press BALANCE/SURROUND ADJUST repeatedly until “DSP EFFECT” appears on the display.
2)Turn MULTI JOG to select the effect level, while the indication of the previous step is still on the display. As you turn it, the effect level changes as follows:
DSP EFFECT 1
DSP EFFECT 2 
DSP EFFECT 3 
DSP EFFECT 5 | DSP EFFECT 4 |
As the number increases, the selected DAP mode becomes stronger.
To cancel the DAP mode
Turn MULTI JOG until “DSP OFF” appears in step 2.
The DSP indicator goes off from the display.
BALANCE/SURROUND
ADJUST
MULTI JOG
Note:
Once you have adjusted the DAP modes, the adjustment is memorized for each DAP mode.
From the remote control:
1. Press SURROUND MODE repeatedly until the mode you | SURROUND |
MODE | |
want appears on the display. |
|
The DSP indicator also lights up on the display.
Each time you press the button, the DSP modes change as follows (the indicator of the selected DSP mode also lights up on the display):
PRO LOGIC 
THEATER 
LIVE CLUB 
DANCE CLUB 
HALL
OFF
PAVILION
3D THEATER 
3D DRAMA 
3D ACTION 
HEADPHONE 
When the digital input is selected to play the source encoded with Dolby
Digital:
DOLBY DIGITAL 
DIG-THEATER
OFF 
3D DIGITAL 
HEADPHONE
If you need to make any adjustment, go to the following steps.
SOUND
CONTROL
Note:
The DAP mode is not used with the other DSP modes such as the
Note:
When you select “HEADPHONE,” you cannot go to the following steps. No adjustments can be made for “HEADPHONE.”
2.Press SOUND CONTROL.
10 keys are activated for sound adjustments.
3. Adjust the speaker output levels as follows: | ENTER | REAR L | ||||||
|
|
|
|
|
|
| ||
• | To adjust the left rear speaker level, press REAR•L |
| 6 | |||||
• | To adjust the right rear speaker level, press REAR•R |
|
|
|
|
|
| |
4.Press EFFECT to select the effect level.
Each time you press the button, the effect level changes as follows:
DSP EFFECT 1 
DSP EFFECT 2 
DSP EFFECT 3
DSP EFFECT 5 | DSP EFFECT 4 |
As the number increases, the selected DAP mode becomes stronger.
REAR
R
8 9
EFFECT
7/P
Note:
You cannot adjust the rear speaker levels when “REAR SPK” is set to “NONE” (see page 20).
Note:
Once you have adjusted the DAP modes, the adjustment is memorized for each DAP mode.
To cancel the DAP mode
Press SURROUND MODE repeatedly until “OFF” appears. The DSP indicator goes off from the display.
35
