Digital connections
This receiver is equipped with three DIGITAL IN terminals — one digital coaxial terminal and two digital optical terminals.
To enjoy Dolby Digital, you have to connect the source components using the DIGITAL IN terminals.
You can connect any component to any one of the digital terminals using the digital coaxial cable (not supplied) or digital optical cable (not supplied).
English
DBS tuner
DBS
DVD player
DVD |
When the component has a digital coaxial output terminal, connect it to the DIGITAL1 (DBS) terminal, using the digital coaxial cable (not supplied).
DIGITAL IN
PCM/DOLBY DIGITAL
Notes:
• When shipped from the |
factory, the DIGITAL IN |
terminals has been set for use |
with the following |
components. |
– DIGITAL 1 (coaxial): For |
CD player
MD recorder
When the component has a digital optical output terminal, connect it to the DIGITAL2 (DVD) or DIGITAL3 (CD) terminal, using the digital optical cable (not supplied).
Before connecting a digital optical cable, unplug the protective plug.
DIGITAL 1 (DBS)
DIGITAL 2 (DVD)
DIGITAL 3 (CD)
DBS tuner |
– DIGITAL 2 (optical): For |
DVD player |
– DIGITAL 3 (optical): For CD |
player |
• When you want to operate the |
CD player or MD recorder |
using the COMPU LINK |
remote control system, |
connect the target component |
also as described in “Analog |
connections” (see page 9). |
IMPORTANT:
•When connecting the DVD player or the DBS tuner using the digital terminal, you also need to connect it to the video jack (either composite video terminal or
•After connecting the above components using the DIGITAL IN terminals, set the following correctly if necessary.
–Select the digital input mode correctly. For details, see “Selecting the Input Mode” on page 18.
–Set the digital input (DIGITAL IN) terminal setting correctly. For details, see “Digital Input (DIGITAL IN) Terminal Setting” on page 20.
12