Connecting the Speakers
You can connect the following speakers:
•Two pairs of front speakers to produce normal stereo sound.
•One pair of rear speakers to enjoy the surround effect.
•One center speaker to produce more effective surround effect (to emphasize human voices).
•One subwoofer to enhance the bass.
IMPORTANT:
After connecting the speakers listed above, set the speaker setting information properly to obtain the best possible performance. For details, see pages 19 and 20.
For each speaker (except for subwoofer), connect the
1 | 2 |
|
| 3 | 4 |
|
| 1 |
| 1 | 1 |
|
|
|
| ||
|
|
| RIGHT | RIGHT | RIGHT |
|
|
|
|
1Cut, twist and remove the insulation at the end of each speaker signal cable.
2Turn the knob counterclockwise.
3Insert the speaker signal cable.
4Turn the knob clockwise.
Connecting the front speakers
Connect the front speakers to the FRONT SPEAKERS terminals.
You can connect two pairs of front speakers (one pair to the FRONT SPEAKERS 1 terminals, and another pair to the FRONT SPEAKERS 2 terminals).
1 |
|
|
|
+ | – | – | 1 |
+ | |||
2 |
|
| 2 |
| RIGHT |
| LEFT |
|
|
| FRONT SPEAKERS |
Left Speaker | Right Speaker |
English
CAUTION:
Use speakers with the
SPEAKER IMPEDANCE indicated by the speaker terminals.
6