Receiving Radio Broadcasts, English, On the front panel only

Receiving Radio Broadcasts

You can browse through all the stations or use the preset function to go immediately to a particular station.

English

				IMPORTANT:
		AUDIO/TV		When using the Remote Control, check to see if its remote control
		/VCR		mode selector is set to the correct position:


		CATV		To operate this receiver, set it to “AUDIO/TV/VCR” (except when
		/DBS		selecting the DBS tuner as the source).
				selecting the DBS tuner as the source).

Some countries space AM stations 9 kHz apart, and other countries use 10 kHz spacing. When shipped, the spacing is set to 9 kHz.

On the front panel only:


To select the 10 kHz interval:			STANDBY
Be sure the receiver is turned off, but is plugged into			TUNER PRESET
an AC outlet and	POWER is pressed to set it in
			and


the _ON position. Hold down TUNER PRESET			STANDBY/ON
and press STANDBY/ON		. “10K STEP” appears


on the display for about three seconds. Now the 10
kHz interval is selected.
To change back to the 9 kHz interval:			STANDBY
Be sure the receiver is turned off, but is plugged into			FM MODE
an AC outlet and	POWER is pressed to set it in		and


the _ON position. Hold down FM MODE and press			STANDBY/ON
STANDBY/ON	. “9K STEP” appears on the

display for about three seconds. Now the 9 kHz interval is selected.

On the front panel:

1. Press FM/AM TUNING to select the band.

FM/AM TUNING

Each time you press the button, the band alternates between

FM and AM.

Notes:

• When you turn MULTI JOG

quickly or hold the TUNING

2.Turn MULTI JOG until you find the frequency you want.

•Turning it clockwise increases the frequency.

•Turning it counterclockwise decreases the frequency.

From the remote control:

1.Press FM/AM to select the band.

Each time you press the button, the band alternates between FM and AM.

2.Press TUNING DOWN or TUNING UP repeatedly until you find the frequency you want.

MULTI JOG

FM/AM

TUNING	UP
FF / ¢

DOWN TUNING REW / 4

UP or TUNING DOWN in step

2, the frequency keeps

changing until a station is

tuned in.

• When a station of sufficient

signal strength is tuned in, the

TUNED indicator lights up on

the display.

When an FM stereo program

is received, the STEREO

indicator also lights up.