JVC RX-884PBK manual Specifications, English, Amplifier

English

Specifications

Amplifier

Output Power	At Stereo operation
	Front channels	100 watts per channel, min. RMS,
		driven into 4 ohms at 1 kHz, with
		no more than 0.7 % total harmonic
		distortion. (IEC268-3/DIN)
		50 watts per channel, min. RMS,
		driven into 8 ohms at 1 kHz, with
		no more than 0.7 % total harmonic
		distortion. (IEC268-3/DIN)
	At Surround operation
	Front channels	70 watts per channel, min. RMS,
		driven into 4 ohms at 1 kHz, with
		no more than 0.8 % total harmonic
		distortion.
	Center channel	70 watts, min. RMS, driven into
		4 ohms at 1 kHz, with no more than
		0.8 % total harmonic distortion.
	Rear channels	70 watts per channel, min. RMS,
		driven into 4 ohms at 1 kHz, with
		no more than 0.8 % total harmonic
		distortion.
Total Harmonic Distortion (8 ohms, 1 kHz)		0.02 %* at 50 watts output
		(* Measured by JVC Audio
		Analysis System)
Audio Input Sensitivity/Impedance (1 kHz)	PHONO (MM)	2.5 mV/47 k ohms
	CD, TAPE/MD, TV SOUND/DBS, VCR1, VCR2,	VIDEO, DVD
	......................................................	200 mV/47 k ohms
Audio Input (DIGITAL IN)	Coaxial: DIGITAL 1 (DBS)	0.5 Vp-p/75 ohms
	Optical: DIGITAL 2 (DVD), DIGITAL 3 (CD)	–21 dBm to –15 dBm (660 nm ±30
		nm)
Audio Output Level	TAPE/MD, VCR1, VCR2	200 mV
Signal-to-Noise Ratio (’66 IHF/DIN)	PHONO	70 dB/66 dB
	CD, TAPE/MD, TV SOUND/DBS, VCR1, VCR2,	VIDEO, DVD
	......................................................	87 dB/67 dB
Frequency Response (8 ohms)	PHONO	20 Hz to 20 kHz (±1 dB)
	CD, TAPE/MD, TV SOUND/DBS, VCR1, VCR2,	VIDEO, DVD
	......................................................	20 Hz to 20 kHz (±1 dB)
RIAA Phono Equalization		±0.5 dB (20 Hz to 20 kHz)
Loudness Control (Volume Control at –30 dB)		..... +6 ±1 dB at 100 Hz
	.....................................................................................	+4 ±1 dB at 10 kHz
S.E.A	Center Frequencies	100 Hz, 1 kHz, 10 kHz
	Control Range	±10 dB ±2 dB

67