Entering the Disc Information
For the CD Player with the disc memory function:
You can use the disc memory function through this receiver.
The disc information (its performer, disc title, and its music genre) of normal audio CDs will be stored into the memory built in the CD player.
For the disc memory function, refer to the manual supplied with your CD player.
•The performer, disc title, and music genre information are usually recorded in a CD Text. However, if a CD Text has no genre information recorded in the disc itself, you can input its music genre by yourself.
Note: You can enter the TITLE INPUT screens for a CD Text and input its titles. However, you cannot store the titles you have input for a CD Text.
Example: Entering the following information for Disc 1
Performer: “MICHEAL”
Disc title: “MY FAVORITE”
1.Display the disc information screen by following the procedure on page 52.
2.Press ON SCREEN CONTROL %/ Þ to move 
to “TITLE INPUT,” then press SET.
The TITLE INPUT: PERFORMER screen appears on the TV.
3.Press ON SCREEN CONTROL % / Þ / @/ # to move 
in front of a character you want, then press SET to enter the character.
• If the current CD is a CD Text, go to step 5 without entering the performer.
To use the lower case letters, press ON SCREEN CONTROL %/ Þ / @/ #to
move | to SHIFT , then press SET. |
To use the upper case letters again, press ON SCREEN CONTROL %/ Þ / @ / #
to move 
to SHIFT , then press SET.
4.Repeat step 3 until you finish putting a name (up to 32 characters) to this User File.
To insert a space, press ON SCREEN CONTROL %/ Þ / @/ #to move 
to SPACE , then press SET.
To correct an incorrect character:
1)Press ON SCREEN CONTROL % / Þ / @/ # to move 
to 
or 
, then press SET until the incorrect character is selected.
2)Press ON SCREEN CONTROL % / Þ / @/ # to move 
to CANCEL, then press SET to erase the character.
3)Press ON SCREEN CONTROL % / Þ / @/ # to move 
in front of an correct character, then press SET to enter a correct character.
5.Press ON SCREEN CONTROL % / Þ / @/ # to move 
to “DISC1:
MICHEAL (in this example),” then press SET. The TITLE INPUT: DISC TITLE screen appears.
6.Enter the disc title, referring to steps 3 and 4.
• If the current CD is a CD Text, go to the next step without entering the disc title.
Continued to the next page.
English
TITLE INPUT: PERFORMER screen
TITLE INPUT: DISC TITLE screen
56
