Digital Input (DIGITAL IN) Terminal Setting
When you use the digital input terminals, you have to register what components are connected to which terminals (DIGITAL IN 1/2/3).
On the front panel only:
1. Press SETTING repeatedly until “DIGITAL IN”
appears on the display. | SETTING |
| |
The display changes to show the current setting. |
|
DIGITAL 2 terminal setting |
|
|
|
|
|
|
|
|
|
|
|
| VOLUME |
| |
DIGITAL 1 terminal setting | DIGITAL 3 terminal setting | |||||
MULTI JOG
2.Turn MULTI JOG to select the appropriate digital terminal setting, while the indication of the previous step is still on the display.
As you turn it, the display changes to show the following:
Ò1 DBS 2 DVD 3 CD Ò 1 MD 2 DVD 3 CD Ò 1 MD 2 DBS 3 CD
Ò1 MD 2 DBS 3 DVD Ò 1 CD 2 DVD 3 MD Ò1 CD 2 DBS 3 MD
Ò1 CD 2 DBS 3 DVD Ò 1 DVD 2 CD 3 MD Ò 1 DVD 2 DBS 3 MD
Ò1 DVD 2 DBS 3 CD Ò 1DBS 2 CD 3 MD ÒDBS 2 DVD 3 MD
Ò(back to the beginning)
Setting the Speakers for the DSP Modes
To obtain the best possible surround sound of the DSP modes, you have to register the information about the speakers arrangement after all connections are completed.
Front, Center, and Rear Speaker Setting
Register the sizes of the other speakers.
On the front panel only:
1. Press SETTING repeatedly until “FRONT SPK” (Front |
|
Speaker), “CENTER SPK” (Center Speaker) or “REAR | SETTING |
SPK” (Rear Speaker) appears on the display. |
|
English
Note:
When shipped from the factory, the DIGITAL IN terminals can be used as the digital input for the following components.
•DIGITAL 1 (coaxial): For DBS tuner
•DIGITAL 2 (optical): For DVD player
•DIGITAL 3 (optical): For CD player
Note:
When you change your speakers, you need to register the information about the speakers again.
The display changes to show the current setting.
2. Turn MULTI JOG to select the appropriate item about your front, center and rear speakers, while the indication of the previous step is still on the display.
As you turn it, the display changes to show the following:
MULTI JOG
Notes:
• If the size of the cone speaker |
unit built in your speaker is |
|
|
| LARGE |
| SMALL |
| NONE |
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
LARGE |
| Select this when the speaker size is relatively large. | |||||||
|
|
|
|
|
|
|
| ||
SMALL |
| Select this when the speaker size is relatively small. | |||||||
|
|
|
|
|
|
|
| ||
NONE |
| Select this when you have not connect a speaker. (Not selectable | |||||||
|
| for the front speakers) |
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
greater than 12 cm (4 3/4 |
inches), select “LARGE,” and |
if it is smaller than 12 cm (4 3/4 |
inches), select “SMALL.” |
• If you have selected “NO” for |
the subwoofer setting above, |
you can only select “LARGE” |
for the front speaker setting. |
20
