|
| Record | mode |
|
Recording | still pictures | onto a card | • | display in the card |
(Photoshot) |
| recording | mode |
i_iHHHHHHHHHHHHHHHHHHHHiHiHHHiHHHHHHHHHHHHHHHHHHHiHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH_
•Set to Card Recording Mode.
1 Press the Photoshot button [O]-
©
3]
4)
1)Still picture size
2)Card indication
3)Number of recordable still pictures (When no picture can be recorded, this indication will flash in red.)
4)Quality of still pictures
o
•To record still pictures clearly
•When zooming in on the subject with a
magnification of 4x or higher, it is difficult to reduce the slight shaking from holding the
Camcorder by hand. We recommend
decreasing the zoom magnification and approaching the subject when recording.
•When recording still pictures, hold the Camcorder firmly with your hands and keep
your arms stationary at your side so as not to shake the Camcorder.
•You can record stable pictures without shaking by using a tripod.
•For the number of still pictures to be recorded on a card, refer to
•Moving pictures and sound cannot be recorded onto a card.
•While data is being recorded on a card, do not operate the mode dial.
•When the access lamp is lit, do not remove the card.
•Another product may degrade or not play back data recorded on this Camcorder.
•If you set [PICT.QUALITY] >> [==%],mosaic- pattern noise may appear on a playback image depending on the picture content.
•Select the picture quality for photoshot images
1Set [BASIC] >> [PICT.QUALITY] >> select the desired picture quality.
[ ==!==]: High picture quality
[_=]: Normal picture quality
•You can also change the picture quality on [ADVANCED] >> [PICT.QUALITY] in the tape recording mode.
•Recording with a shutter operation effect
You can add a shutter operation simulating sound.
1 Set [ADVANCED] >> [SHTR EFFECT] >>
[ON].
30
LSQT1121
