Playback mode
Playback mode
Playing back tape
IIII_WIIIIIIIIIIIIIIWIIIIIIIIIIIIWIIIIIIIIII_IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII_WIIIIIIIIIII_IIIIIIIIIIIW
•Set to Tape Playback Mode.
[An operation icon automatically appears on the LCD monitor.)
1 Operate with joystick.
•To adjust volume
Adjust the speaker volume for playback.
1 Move the [--_/VOL+] lever to adjust the volume.
W T
I_/11: Playback/Pause
_1_1: Rewind/Review playback (Reverts to
playback with the I_/! ! icon.)
I_1_: Fast forward/Cue playback (Reverts to playback with the
m:Stop
•The power will not turn off when the LCD monitor and the viewfinder are closed and
retracted during Tape playback mode.
•During cue/review playback,
•Before and after cue/review playback, the screen may become blue for a moment or images may be disturbed.
Towards [+]: increases the volume
Towards [ ]: decreases the volume
(The nearer the bar is to [+], the higher the volume.)
•When the adjustment is completed, the volume indication will disappear.
•If you do not hear the sound, check the settings of [SETUP] >> [12bit AUDIO].
•Repeat playback
When the tape end is reached, the tape will be rewound and played back again.
1 Set [ADVANCED] >> [REPEAT PLAY] >> [ON].
•The [(_.)_.] indication appears. (In order to cancel the repeat playback mode, set [REPEAT PLAY] >> [OFF] or turn off the power.)
Settings on the audio
• If you cannot listen to the desired audio when playing back a tape, check the settings in [SETUP] >> [12bit AUDIO].
• When you record the audio in [12bit] and set [SETUP] >> [12bit AUDIO] >> [MIX], the audio will be played back in stereo sound regardless of the settings in [AUDIO OUT].
4O
LSQT1121
