Panasonic PV-V4022 warranty Special VCR Features, On-Screen Displays OSD, Dubbing Before

Special VCR Features

Tape Position Display Feature Weak Signal Display ON/OFF Feature

• Special

On-Screen Displays (OSD)

On-Screen Displays (OSD)

To find out the present tape position.

Tape position is displayed for VHS-C Cassettes type, tapes under 30 minutes, and some other tapes, but the position is not correct.

1 Press TAPE POSITION

to detect tape position.

When set to “ON,” picture is displayed regardless of signal strength.

1 Press ACTION to display menu.

VCR	CLOCK	CHANNEL
REPEAT PLAY		:OFF
REMOTE WARNING		:ON
AUTO SHUT- OFF		:OFF

IDIOMA/LANGUE : ENGLISH

VCR’ S OUTPUT CH :3

VCR Features

Function & Channel Displays

CH 0 8 When a function button is pressed, e.g. PLAY, or you change channels,

a 5 second display appears.

Blank Tape/

No Video Signal Indications

When blank tape is detected during play, or the current channel has no signal (with Weak Signal Display feature (p. 10) set to OFF), the TV screen will turn solid blue.

DETECTING TAPE POSITION

• “DETECTING TAPE

POSITION” only

SELECT	:
EXIT	: ACT I ON

•

VCR Status & Clock Displays

appears the first time

a cassette is inserted

and it takes several

seconds for correct

indication to appear.

• The present tape

position indication is

2

VCR CLOCK CHANNEL

ANTENNA : CABLE AUTO SET

WEAK SIGNAL DISPLAY : OFF

SELECT :		SET :
EXIT	: ACT I ON

Press to select and display CHANNEL.

Press to select

WEAK SIGNAL DISPLAY, and press

to set ON or OFF.

Copy Your Tapes

To display or remove overlay at right,

➛press DISPLAY*.

Function Status	Current Time		Channel
Rec Time Remaining	REC	12 : 0 0AM CH 02	Counter
	0 : 25	-0 : 12 : 34
(OTR mode only.	STEREO	SP
	SAP
See p. 5 of Basic	MONO
Operations book.)

BEGIN END

displayed.

• ON: Picture is displayed despite signal condition an may have poor quality.

Broadcast Audio Tape Speed

2 Press TAPE POSITION

to return to normal screen.

Remote Warning ON/OFF Feature

If Multi-brand feature is used (page 2), and this feature is set to on, a warning appears whenever an invalid key is pressed in TV mode.

OFF: Screen turns solid blue when signal is weak or non-existent.

•Selecting ON has no effect on connected equipment with blue back feature.

3 Press ACTION to return to normal screen.

(Dubbing) • Before

Being Received	(See p. 3 of Basic
(For Model PV-V4522 only)	Operations book.)

Warning and Instruction Displays	These displays will alert you to a missed
	operation or provide further instructions.
OSD	Caution	Page

1 Press ACTION to display menu.

2				Press	to select
	VCR	CLOCK	CHANNEL
	REPEAT PLAY		:OFF	REMOTE WARNING
	REMOTE WARNING		:ON
	AUTO SHUT- OFF		:OFF	and press	to set ON
	IDIOMA/LANGUE : ENGLISH
	VCR’ S OUTPUT CH		:3
	SELECT :	SET :		or OFF.
				• If “OFF,” remote
	EXIT : ACT I ON
				warning will not appear
				if invalid key is pressed.

3 Press ACTION to return to normal screen.

Auto Shut-Off Feature

The power shuts off at a preset time.

1 Press ACTION to display menu.

2				Press	to select
	VCR	CLOCK	CHANNEL
	REPEAT PLAY		:OFF	AUTO SHUT-OFF.
	REMOTE WARNING		:ON
	AUTO SHUT- OFF		:OFF	Press	repeatedly to
	IDIOMA/LANGUE : ENGLISH
	VCR’ S OUTPUT CH		:3
	SELECT :	SET :		change shutoff time as
				shown below.
	EXIT : ACT I ON

	OFF
2	Hours
4	Hours
6	Hours

3 Press ACTION to return to normal screen.

Note • The shut-off countdown will not function during Play or Record.

VCR Lock Feature

When set to ON, all operations except for timer record and tape eject are prohibited. Useful for households with small children.

To turn on, hold down

REC on the VCR in Stop

VCR LOCK ACT I VATEDmode with no tape

inserted for 7 sec. (Please ignore the NO CASSETTE warning.)

To turn off, repeat above.

VCR LOCK OFF

• VCR Lock cancels in 24 hours if clock is set.

REC

Requesting Service

PLEASE SET CLOCK BY	If you attempt to set or review a Timer	See page 6 of
PRESSING ACTION KEY	Recording and the Clock is not set...	Basic Operations
		book
TURN VCR OFF	After a Timer Program has been set...	See page 6 of
		Basic Operations
FOR TIMER RECORDING
		book
CHECK CASSETTE	If you press REC on the remote	See page 3 of
	control or VCR, and a cassette is	Basic Operations
RECORD TAB
	inserted with no record tab...	book
NO CASSETTE	If you press PLAY, FF, REW, or REC	See page 5 of
	on the remote control or VCR without	Basic Operations
	a cassette inserted...	book
TO CANCEL TIMER REC	If you press POWER or STOP during	See page 6 of
PRESS POWER THEN	a Timer Recording...	Basic Operations
STOP KEY	(visible in VCR mode only)	book
VIDEO HEADS MAY
NEED CLEANING		See page 3 of
PLEASE INSERT HEAD	If head cleaning becomes necessary
		Basic Operations
CLEANING CASSETTE	while playing back a tape...
		book
OR REFER TO MANUAL
END :PLAY
VCR LOCK ACTIVATED	If you press a function button other
	than STOP/EJECT or POWER while	See page 10
	the VCR is in VCR Lock mode...
REMOTE CONTROL IS SET If you press an invalid key on the
TO TV MODE	remote while in TV mode...	See pages 2, 10
USE VCR : VCR KEY

*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.

*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.

- 10 - - 11 -