Panasonic PV-V4622 Playback, Play SELECT/ SET, To select C/A and display SET UP Commercial ADV

*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.

Playback

When playing back a recording which has been

marked using the feature, you can either set VCR to automatically advance through marked commercial blocks, or set it so that commercials are only skipped on your command.

1	VCR	C / A CLOCK CH		Press ACTION
	REPEAT PLAY		:OFF	to display menu.
	T I ME STAMP		:ON
	REMOTE WARNING		:ON
	AUTO SHUT- OFF		:OFF
	AUTO VCR/TV		:ON
	IDIOMA/LANGUE : ENGLISH
	VCR’ S OUTPUT CH		:3
	SELECT :
	EXIT	: ACT I ON

PLAY

FF

SELECT/ SET

:PLAY :STOP

2	VCR	C / A CLOCK CH
	SET UP COMMERCIAL ADV.
	C/A RECORD		:ON
	C/A PLAYBACK		:AUTO
	SELECT :
	EXIT	: ACT I ON

Press

to select C/A and display SET UP COMMERCIAL ADV.

:FF :REW

ACTION

3	VCR	C / A	CLOCK CH
	SET UP COMMERCIAL ADV.
	C/A RECORD			:ON
	C/A PLAYBACK			:AUTO
	SELECT :			SET :
	EXIT	: ACT I ON

Press

to select C/A PLAYBACK and press to set “AUTO” or “MANUAL”.

CA/ZERO

AUTO	: VCR will automatically advance through
	marked commercial blocks recorded on the
	tape and then resume playback.

MANUAL : VCR will advance through commercials only when CA/ZERO is pressed. Playback will resume when the end mark of a commercial block is found, or a new recording or blank portion is detected, or after 8 minutes.

4 Press ACTION again

to return to normal screen.

and

are registered trademarks of SRT, Inc. A Jerry lggulden invention licensed in association with Arthur

D. Little Enterprises, Inc. U.S.Pat. No. 5,333,091; 5,692,093; 5,696,866 other patents pending

Notes

•The selection mode in step 3 remains set unless there is a power outage in which case the original factory setting will be restored.

•If playback is started in the middle of a commercial, only a single commercial is shown, or an individual commercial is longer than 1 minute, the commercial may not be skipped.

Press FF to quickly advance through the commercial.

•Part of a recorded program may be skipped over if the program portion between commercials is less than 1 minute or there are frequent dark and quiet scenes during the program. To view the portion of tape being incorrectly skipped, press PLAY while the VCR is skipping, reverse the tape to a point just prior to where the skipping began and press PLAY again. This time the group will not be automatically skipped. Automatic skipping will be re-enabled when the end of the marked group is detected.

27