Panasonic PV-V4622 How to Connect, Doing Initial Setup Ready to Play, From ANT./CABLE

Initial Setup for ANT./Cable➛VCR➛TV Connection

Please make all cable or antenna connections before plugging into the AC outlet.

Plugging the VCR Power Cord into an AC wall outlet starts auto channel and clock set.

How to Connect

1 Connectjack. cable from Antenna/Cable to VCR’s IN FROM ANT.

2 Connect VCR’s OUT TO TV jack to TV’s ANT. IN jack with included RF Cable accessory.

VCR IN FROM ANT.

TV

1 IN from ANT./CABLE

OUT TO TV

2

VHF/UHF

Doing Initial Setup (Ready to Play)

1 Turn TV on and tune to channel 3.

2 Plug VCR Power Cord into AC wall outlet. VCR comes on and auto channel and clock set starts.

•If screen at right does not appear, check VCR - TV connection and, if TV is tuned to channel 3, try switching it to channel 4.

•To change VCR’s output channel, please refer to “VCR’s Output Channel” on page 13.

WARNING

When using “Nut type” RF coaxial cables, tighten with fingers only. Overtightening may damage terminals.

Plugging the AC Power Plug into an AC outlet

CH AUTO SET PROCEEDING

CANCEL : STOP

AUTO CLOCK SET

PROCEEDING

CANCEL : STOP

8 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com