Panasonic PWW 4000 Accessories, Air outlet accessories, Air intake accessories, FK filter box

Accessories

The units are outfitted at the factory with horizontal air outlet flaps.

The individually adjustable fins allow the flow of warm air to be aimed in two directions.

Air outlet accessories

Air outlet flap B (horizontal/vertical)

Installing the flap allows air to be directed across longer distances. The vertical and horizontal arrangement of the fins make it possible to direct the air in up to 4 direc- tions

When retrofitting, the fins of the existing air outlet flap must be removed.

HG 4 air outlet cover

This air outlet cover makes it possible for air to be dis- tributed evenly in 4 directions when the unit is mounted at a low level.

The air outlet cover may not be used at mounting heights of more than 5.0 m.

When retrofitting, the fins of the existing air outlet flap must be removed.

PWW

HG 4

AD ceiling air outlet nozzle

The ceiling air outlet nozzle makes it possible to con- centrate the warm air flow and is used at higher assem- bly heights and in larger halls.

When retrofitting, the fins of the existing air outlet flap must be removed.

PWW

AD

Air intake accessories

FK filter box

The filter box with pocket filter is designed for direct at- tachment to the unit.

The pocket filter is pulled out on the side.

The filter medium of the pocket filter can be regener- ated and corresponds to the filter class EU 3.

Maintenance of the pocket filter

Depending on the operating conditions, the pocket filter must be checked at regular intervals and, if necessary, cleaned or replaced.

EF replacement pocket filters for the units:

PWW 4030 Ref. No. 1686253

PWW 4050 Ref. No. 1686254

PWW 4080 Ref. No. 1686255

PWW 4100 Ref. No. 1686256

Information about the FK filter box

How dirty the pocket filter is can be monitored via a dif- ferential pressure switch (special accessory)

When the final pressure differential is reached, the pocket filters must be replaced by new filters in the same class.

MLK mixed-air box

The MLK mixed-air box is designed to be mounted on the wall or the ceiling.

The ratio of outside air to circulation air can be set manually with the mixed-air flaps in gradual stages or with a flap adjustment motor (accessory).

Maintenance of the mixed-air box

When operating the mixed-air box with a flap adjust- ment motor, the mixed-air flaps must be checked at regular intervals for dirt and to ensure that they are functioning properly.

10