ENGLISH
Connections
1 | … Connect the transmitter to the AV |
| 1 |
| unit. |
A | A The cable can be connected directly to a stereo |
mini jack or to a large stereo headphone jack if | |
| the included plug adaptor is used. |
| a Portable CD player, headphone stereo, radio/ |
| tape players, personal computer, etc. |
| OR |
OPR / CHG | B Use the included mini jack/pin cord adaptor to |
| connect the transmitter to your equipment’s |
| stereo pin terminals. |
| b Amplifier, TV set, video deck, cassette deck, |
| DVD player, personal computer, etc. |
RQT7572
B
AUDIO OUT
R
L
2
DC IN 
12V
…Connect the transmitter to a household AC outlet using the
supplied AC power adaptor.
Disconnect the AC adaptor from the household AC outlet if the unit is not going to be used for a long time.
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.
Note
The OPR/CHG indicator lights in red when the transmitter receives input. It does not light just by connecting the transmitter to an AC power source.
Installation
This unit uses radio waves.
The waves can be transmitted to a range of up to 60 meters (200 ft.).
Note
Under optimum conditions, the headphones can pick up clear signals from the transmitter to a maximum of 60 meters (200 ft.). Metal between the two units and the presence of other radio waves can cause interference to occur at a shorter distance. This interference can be cleared by moving closer to the transmitter, removing the obstructions, or changing the transmission frequency (see page 14).
You may occasionally experience interference due to dead spots in the area covered by the transmitter. This phenomena occurs with any kind of radio signal and is not a malfunction. Dead spots can be moved by moving the transmitter and the headphones.
