Automatic speaker detection

Automatic speaker detection is performed during auto speaker setup. Do the following only if you want to check speakers’ status, and not other settings.

1Turn on the unit.

Press

• The standby indicator goes off when you turn on the unit.

2Start automatic speaker detection.

SPEAKERS
A	B
Press	at the same time.
AUTO DETECTOR
	↓	↓		↓
(Checks each speaker’s		(Shows the number of detected	(Shows connected speakers)	(Automatic speaker detection ends.
connection status)		speakers, excluding the subwoofer)		The previous display reappears)

•These settings are saved even if you turn the unit off.

•Refer to page 14 for further notes and page 16 for error message explanations. (“WARNING” may appears on the display during the detection here.)

Speaker output and level

Adjust the level of the speakers so they are the same apparent level as the front speakers from the seating area. Speaker level is adjusted during auto speaker setup. Do the following only if you find the level unsatisfactory.

Before playback ENGLISH

1To turn on SPEAKERS A.

SPEAKERS

Press

If you have bi-wired your front speakers (➡ page 13), make sure you have selected “YES” for the “LR BI-WIRE setting” (➡ page 27).

	SPEAKERS	SPEAKERS	SPEAKERS
	A	B	SPEAKERS
Press	or		BI-WIRE
Press	or		A B

SPEAKERS A are on		SPEAKERS A and B are on
SPEAKERS	or	SPEAKERS
A	or	A B
A		A B

•The unit does not output the test signal if only SPEAKERS B is on.

2	Press	AUTO	to output the test signal.
		TEST

•The signal is output from each speaker in order for about two seconds each:

L→C→R→RS→SBR→SBL→LS→SUBW or L→C→R→RS→SB1→LS→SUBW

1If you connect one surround back speaker only (the left surround back speaker)

Speaker abbreviations
L: Front left	C: Center
R: Front right	RS: Surround right
LS: Surround left	SBR: Surround back right
SBL: Surround back left	SB: Surround back (If you connect
SUBW: Subwoofer	one surround back speaker)
SUBW: Subwoofer

Make sure your speaker settings match your connections (➡ pages 13, and 14 to 16). There will be no output from a speaker if it is set as NO or NONE (➡ page 27).

3Set speakers volume to the level you would normally use.

Press	VOLUME	Volume range:
Press		-- dB (minimum), -79 dB to 0 dB (maximum)
		-- dB (minimum), -79 dB to 0 dB (maximum)

4Press LEVEL to select the speaker channel to adjust.

5	Press			to adjust the level	Adjustment range:
5					-20 dB to +10 dB (Factory setting: 0 dB )
					-20 dB to +10 dB (Factory setting: 0 dB )
	to the same apparent level as the				For the subwoofer (SUBW)
	front speakers.				MIN (minimum) ↔ 1 to 29 ↔ MAX (maximum)
	front speakers.				(Factory setting: 20 )
	Repeat steps 4 and 5 for each speaker channel.
					The test signal is output only from the speaker you are adjusting in
					steps 4 and 5. Test signal for connected speakers resumes after 2
					seconds.

6	Press		AUTO	to stop the test signal.
			AUTO
		TEST

RQTV0156

SA-XR58 specifications

The Panasonic SA-XR58 is a sophisticated digital AV receiver that combines cutting-edge technology with high-quality sound performance, making it an exceptional choice for home theater enthusiasts. Launched as part of Panasonic’s renowned XR series, this receiver highlights innovative digital technology and careful engineering, achieving a captivating audio experience.

One of the standout features of the SA-XR58 is its Class D amplification. Unlike traditional Class A/B amplifiers that can be bulky and inefficient, the SA-XR58 utilizes a digital amplifier design that is lightweight and energy-efficient while delivering an impressive 100 watts per channel into 8 ohms. This allows users to enjoy rich, dynamic sound without the heat and power consumption associated with conventional amplifiers. The digital architecture also contributes to the clarity and precision in audio, ensuring a faithful reproduction of soundtracks and music.

The SA-XR58 supports a wide variety of audio formats, including Dolby Digital, DTS, and various PCM formats, enabling it to handle diverse content seamlessly. Additionally, with its integrated 7.1 channel surround sound capability, users can experience immersive audio that propels them right into the action of movies and games. The unit is equipped with multiple inputs, including HDMI, component video, and optical digital audio, providing flexibility for connecting numerous devices such as gaming consoles, Blu-ray players, and streaming boxes.

Another technological highlight of the SA-XR58 is its advanced audio processing capabilities. This receiver features a sophisticated equalizer that allows for fine-tuning of audio settings to match the acoustics of your room. This ensures optimal sound quality, regardless of the environment. The inclusion of an easy-to-use on-screen interface makes setup straightforward for users, allowing for quick adjustments to settings and preferences.

In terms of design, the SA-XR58 boasts a sleek and modern aesthetic that can fit into any home theater setup. The front panel includes direct access buttons and a clear display, ensuring ease of use during operation.

Overall, the Panasonic SA-XR58 stands out with its blend of advanced digital technology, powerful amplification, and user-friendly features. It not only caters to audiophiles looking for high-quality sound but also provides an exceptional experience for casual listeners, making it a versatile addition to any audio system. With its robust capabilities and reliable performance, it continues to be a respected choice for those looking to elevate their home entertainment systems.

Panasonic SA-XR58 manual Automatic speaker detection, Speaker output and level

Models: SA-XR58