Panasonic SA-XR58 manual Playback options ENGLISH, Using SPEAKERS B, Advanced Dual Amp, Bi-Amp

Playback options

ADVANCED	[BI-AMP]
DUAL AMP

		AUTO	ADVANCED	BI-AMP		HDMI
SPEAKERS		SPEAKER SETUP	DUAL AMP
						INPUT SELECTOR	VOLUME
A	B	SPEAKERS		TUNE	MENU		ENTER
		A	B	SURROUND	SETUP
		AUTO DETECTOR			RETURN

AUX SETUP MIC

S VIDEO IN VIDEO IN L R

RECEIVER AV

SYSTEM		RECORDER
	TV	DVD
TUNER		PLAYER
CD	VCR	DVD
BAND		ANALOG 6CH

CH

Using

SPEAKERS B

To use the speakers connected to the FRONT B terminals.

SPEAKERS

B

Press

•Sound will be stereo from SPEAKERS B.

•If you have only SPEAKERS B on and the input signal is multi- channel, the signal is down-mixed and “2CH MIX” appears on the display.

•To turn off sound from SPEAKERS A, press [SPEAKERS A] so “ A ” goes off.

•Note that if you are using DVD 6CH input (below), only the sound for the front speakers is output.

•Speaker settings (➡ page 27) are fixed as follows when you have only SPEAKERS B on.

Speaker size: LARGE

Subwoofer: NO (bass is output from the front speakers.)

ADVANCED DUAL AMP

The Advanced Dual Amp activates automatically. In stereo sources or	•	[ADVANCED DUAL AMP]
in 5.1 channel, the unused surround back speakers amplifiers drive the		lights when the function is
front speakers for a clearer, purer sound.		on.
	•	You can turn this function off
		(➡ page 29).

Playback options ENGLISH

BI-AMP

The bi-amp activates if you have bi-wired your front speakers and play analogue or stereo PCM sources.

The amplifiers for the front and surround speakers separately run the low frequency and high frequency. You can use this feature in combination with the Advanced Dual Amp (➡ above) for an even clearer and purer stereo sound.

Preparation

•Bi-wire your front speakers (➡ page 13).

•Make sure you have selected “YES” for the “LR BI-WIRE setting” (➡ page 27).

•Turn the SURROUND mode off (➡ page 18).

•[BI-AMP] lights when the function is on.

•To make bi-amp settings (➡ page 28).

Note

You cannot use the bi-amp if you are using DVD 6CH input

(➡ below).

Connect your DVD equipment with an HDMI cable (➡ page 5) or with a

Digitalcoaxial cable through the DIGITAL IN COAXIAL 1 terminal (➡ pages 6 and 7).

Playing DVD- Audio

Preparation

•Connect through the DVD 6CH IN terminals (➡ page 8).

•Switch on SPEAKERS A or BI-WIRE.

•Select “DVD” as input (➡ page 18).

		PLAYER
DVD analogue 6CH	Press and hold	DVD	until
		ANALOG 6CH

“DVD 6CH” appears on the display.

If you are using a DVD recorder

You cannot switch to DVD 6CH input if “DVR” is the input source, so connect your recorder through the DVD 6CH IN terminals and select “DVD” as the input source if you want to listen to DVD-Audio.

Note

20

		“Level” settings (➡ pages 14 and
		17) made on this unit, except for
	• To cancel, press and hold until	subwoofer level, are ineffective.
	“DVD” appears on the display.
	This mode lets you enjoy the high-	1. Cancel “DVD 6CH” if
2-channel analogue	quality stereo sound available with	necessary (➡ above).
	DVD-Audio recorded with a sampling	2. In INPUT MODE, fix input to
	frequency of 192 kHz.	analogue (➡ page 28).

RQTV0156