Panasonic SA-XR58 Theater features, Enjoying Home, Digital signals this unit can play, English

Digital signals this unit can play

ENGLISH

Dolby Digital (including

Dolby Digital Surround

EX)

DTS (including DTS-ES and DTS 96/24)

PCM

These digital surround systems were developed by Dolby Laboratories. Dolby
Digital Surround EX, with its additional surround back channels, produces an	DVD etc.
increased sense of realism.
These digital surround systems were developed by DTS (Digital Theater
Systems, Inc.). DTS-ES, with its additional surround back channel, immerses	DVD etc.
you in sound. DTS 96/24 delivers multi-channel sound with superior fidelity (96
kHz/24 bit).
You can input PCM signals with sampling frequencies up to 192 kHz with the
DIGITAL IN COAXIAL 1 terminal. The other digital terminals allow input of up to	CD, DVD-
96 kHz. The display shows the sampling frequency when you input 88.2-kHz,	Audio etc.
96-kHz, 176.4-kHz, or 192-kHz signals.

Theater features

Note

This unit cannot process Dolby Digital RF or MPEG audio signal.

Signal indicators

		2CH MIX TUNED		MONO ST RDS PS PTY M	SLEEP	DIGITAL INPUT
		SPEAKERS			cm DTS 96/24DTS-ES PCM
		BI-WIRE			kHz	DIGITAL EX EX
		A	B		MHz	PLⅡx NEO:6 SFC
DIGITAL:	Dolby Digital sources				DTS:	DTS sources
DIGITAL EX:	Dolby Digital Surround EX decoder (while in Dolby Pro				DTS 96/24:	DTS 96/24 sources
	LogicΙΙx mode) when the input signal is Dolby Digital 5.1-
	channel or Dolby Digital Surround EX and you are using one
	surround back speaker.
EX:	Dolby Digital Surround EX decoder (while in Dolby Pro				DTS-ES:	DTS-ES Discrete 6.1 sources or when using
	LogicΙΙx mode) when the input signal is DTS 5.1-channel and					the DTS-ES matrix
	you are using one surround back speaker.
PLΙΙx:	Dolby Pro LogicΙΙx decoder				NEO:6:	DTS NEO:6 matrix
PLΙΙ:	Dolby Pro LogicΙΙ with stereo sources when you are not				SFC:	Sound field control
	using a surround back speaker.

Enjoying Home

For your reference

•Dolby Pro LogicΙΙx, NEO:6, and SFC add surround effects by “adding” channels, so if they are off, the unit plays the number of channels recorded in the original source.

For example, if it is a 5.1-channel source, there will be no output from the surround back speakers.

•The SURROUND mode turns off when input is 192-kHz PCM.

•Whenever you switch to a different source, the following display appears to show you the number of channels. (It may not appear with some sources.)

Subwoofer

Surround and surround back channels

Front and center channels

19

RQTV0156