➡page 26 for basic operations
HDMI settings
• Specify the DVD equipment you |
have connected to the HDMI |
| Selecting Input | Standby selection |
2a | Select and confirm. | 2a Select and confirm. |
2b Select and confirm. | 2b Select and confirm. | |
3 | Select the equipment | 3 Select and confirm. |
| and confirm. |
|
HDAVI Control
2a Select and
confirm.
2b Select and
confirm.
3 Select and |
settings ENGLISH
| terminal. |
• | To reduce standby power |
| consumption. |
• | Choice for turning off the HDAVI |
| Control (➡ page 21). |
DVR: You have connected a DVD recorder (factory setting)
DVD: You have connected a DVD player
OFF: Standby power consumption reduced (approximately 0.35 W).
•Signals from DVD equipment cannot pass through HDMI connection to the television when the unit is in standby (➡ page 5).
•HDAVI Control (➡ page 21) does not work when the unit is in standby.
ON: Normal standby power consumption (factory setting)
confirm. |
OFF: HDAVI Control is OFF
ON: HDAVI Control is ON (factory setting)
Receiver
Turning the
ADVANCED DUAL
AMP off
Clear audio at low
volume
Set the dynamic range (the difference between the loudest and softest sounds) compression for Dolby Digital. Use this function when you have to turn the volume down, such as late at night. It compresses the dynamic range so that you can still hear dialogue and leave the sound field unaffected.
Attenuating analogue
input
2Select and confirm.
3 Select and confirm.
2Select and confirm.
3Select a level and confirm.
Note
This function depends on the disc so it may not work at times.
2Select and confirm.
OFF: The Advance Dual Amp is off
AUTO: The Advanced Dual Amp works when possible
Factory setting: AUTO
OFF: | Off |
STANDARD: | The level recommended by |
| the producer of the software |
| for household viewing. |
MAX: | The maximum |
| allowable compression |
| (recommended for night |
| viewing) |
Factory setting: OFF
OFF: Off
ON: On
Analogue input can cause distortion and the “OVERFLOW” warning to appear on the display. Turn the attenuator on if this occurs.
Delaying audio
Delay audio if there appears to
3 | Select and confirm. | Factory setting: OFF | |
| Select “OFF” to cancel. |
|
|
2 | Select and confirm. | OFF: | No delay |
|
| ON: | Audio delayed |
be a difference in timing between audio and pictures.
Resetting factory
settings
Do the necessary settings again after this.
3Select and confirm.
2 Select and confirm.
3Select and confirm.
Select “NO” to cancel.
Factory setting: OFF
YES: Reset all settings to those made in the factory
NO: Cancel
Factory setting: YES
Note
Input switches to TUNER after you select “YES”. (Preset channels remain intact.)
29
RQTV0156
