ENGLISH
Receiver settings
AUTO | ADVANCED | HDMI |
| |
SPEAKER SETUP | DUAL AMP |
| ||
|
|
| INPUT SELECTOR | VOLUME |
SPEAKERS | TUNE | MENU | ENTER | |
A | B | SURROUND | SETUP | |
AUTO DETECTOR |
| RETURN |
| |
|
|
| ||
AUX | SETUP MIC |
S VIDEO IN VIDEO IN L | R |
➡page 26 for basic operations
| INPUT SELECTOR |
MENU | ENTER |
SETUP | |
RETURN |
|
Receiver settings
Digital input settings
•Change these settings to suit the connections you have made to the digital input terminals
(➡ pages 6, 7, 9, and 10).
•You cannot allocate more than one terminal per input. Therefore, if you change the setting for “DVD” to “OPT 1”, digital input for DVD input will be only through the OPTICAL 1 terminal.
2a Select and confirm.
2b Select the equipment and confirm.
3Change the digital input setting and confirm.
Repeat 2b and 3 to change other settings.
TV: | Television |
DVR: | DVD recorder |
DVD: | DVD player |
CD: | CD player |
Factory setting: | |
TV: | OPT1 (OPTICAL 1) |
DVR: | OPT2 (OPTICAL 2) |
DVD: | COAX1 (COAXIAL 1) |
CD: | COAX2 (COAXIAL 2) |
Input signal
•This unit automatically detects whether input is digital or analogue, but you can fix the input mode.
•Select “AUTO” if it isn’t necessary to fix a certain signal.
2a Select and confirm.
2b Select the equipment and confirm.
3Select the setting and confirm.
Repeat 2b and 3 to change other settings.
PCM FIX mode
•In rare cases, the unit may have trouble recognizing the digital signals on discs. Use this mode if the beginnings of tracks are cut off when playing CDs.
•Do not use this mode if the unit can handle audio from CDs normally.
•When PCM FIX mode is on, the unit cannot process other signals. Choose another mode if PCM FIX causes noise.
TV: | Television |
DVR: | DVD recorder |
DVD: | DVD player |
CD: | CD player |
AUTO: | The unit automatically |
| detects whether input is |
| digital or analogue. (HDMI |
| takes priority when input |
| is digital.) |
ANALOG: | Analogue input fixed |
DIG: | Digital input fixed |
PCMFIX: | PCM (from CDs) digital |
| input fixed |
Factory setting:
TV, DVR, DVD, CD: AUTO
For your reference
•“DIGITAL INPUT” lights after fixing digital input.
•“PCM” lights if you select the PCM FIX mode.
•“PCM FIX” flashes on the display if you input any signal other than PCM after you have set the PCM FIX mode.
Bi-amp settings
•This option appears after you have set “LR
•Adjust high frequency (HF) and low frequency (LF) balance.
•Correct HF and LF delay time.
Balance
2Select and confirm.
2a Select and confirm.
3 Adjust and confirm.
Use the bar as a guide.
LF: low frequency
HF: high frequency
Delay time
Speaker |
|
(cross section of | Difference |
a speaker) |
|
2Select and confirm.
2a Select and confirm.
3Adjust and confirm.
cm
Adjustment range: 0 to 30 cm Adjust in
28
RQTV0156
