Panasonic SC-BT330, SC-BT730 Speaker assembly option,  , Preventing the speakers from falling

3	Use of the speaker cable stickers is
	convenient when making cable connections.

e.g. Front speaker (L)

FRONT

Lch





ASpeaker cable sticker (included)

B Connector

Speaker cable sticker		Color
1	FRONT (L)	WHITE
2	FRONT (R)	RED
3	SURROUND (L)	BLUE
4	SURROUND (R)	GRAY
5	CENTER	GREEN
6	SUBWOOFER	PURPLE

Be sure to match the number on each sticker with the connector color.

4	Connecting the speaker cables. Insert the wire fully,
	taking care not to insert beyond the wire insulation.

e.g. Surround speaker

r: White

s: Blue line

Push!

≥Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the speakers.

≥Don’t use a front speaker as a surround speaker or vice versa. Verify the type of speaker with the label on the rear of the speaker before connecting the appropriate cable.

≥To avoid injury by falling or dropping the speaker, place the speaker cables with care not to stumble or hook.

≥Do not hold the speaker in one hand to avoid injury by dropping the speaker when carrying.

Getting started

Speaker assembly option

[BT330]

Thread the speaker cable	Attach the speaker.
through the base.

Leave about 120 mm (4 23/32q)

You can remove and use the cable from the stand. To reattach the cable, refer to page 40.

Insert the wire fully. r: White

s: Blue line Push!

Press into the groove.

Tighten securely.

Slide into the groove.

[BT730] [BT330]

∫Preventing the speakers from falling

≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers.

e.g., [BT730]











AString (not included)

Thread from the wall to the speaker and tie tightly.

BRear of the speaker

CScrew eye (not included) D Wall

E Approx.150 mm (5 29/32q)

VQT2M13

11