Panasonic SC-BT330, SC-BT730 Firmware updates, Network Easy Setting Internet Connection Check

1.	LAN cable connection or	:Pass	≥ Connection
Connection to access point			and settings
2.	IP address setting	:Fail	of the hub
			and router
3.	Connection to gateway	:Fail	≥ Settings of
			"IP Address /
1.	LAN cable connection or	:Pass
			DNS
Connection to access point
			Settings“
2.	IP address setting	:Pass	(> 38)
3.	Connection to gateway	:Fail

Network Easy Setting (Internet Connection Check)

Network Easy Setting (Internet Connection Check)

Complete.

- Connection to the Internet : Fail(Error code: B019)

Failed the connection test.

Cannot find the server.(Error code: B019)

Please refer to the operating instructions for the cause of the error and the solution for it.

Press [OK].

OK

Display	Check the following
Cannot find the server.	≥ Settings of “IP Address / DNS
(Error code: B019)	Settings” (> 38)
	≥ The server may be busy or the
Failed to connect to	service may have been
	suspended. Please wait a few
the server.
	moments, and then try again.
(Error code: B020)
	≥ Settings of “Proxy Server
	Settings” (> 38) and the router.

≥Refer to the operating instructions of the hub or router.

≥You can perform this setup anytime by selecting “Network Easy Setting” in the Setup menu. (> 38)

≥You can redo these settings individually using “Network”. (> 38)

≥If you experience problems after selecting “Wireless”, you should first confirm the setting of your Wireless router (Access point) connected to your home network using your PC.

≥After performing network settings on this unit, the settings (encryption level, etc.) of the Wireless router (Access point) might change. When you have trouble getting online on your PC, perform the network settings on your PC in accordance with the settings of Wireless router (Access point).

Firmware updates

Occasionally, Panasonic may release updated firmware for this	started
These updates are available free of charge.
unit that may add or improve the way a feature operates.
This unit is capable of checking the firmware automatically	Getting
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following screen
is displayed.

Firmware Update

Latest Online Version: x.xx

Current Installed Version: x.xx

Do you want to start firmware update? For the update information, please visit the following website: http://panasonic.net/support/

YesNo

OK

RETURN

If downloading on this unit fails or this unit is not connected to the Internet, then you can download the latest firmware from the following website and burn it to a CD-R to update the firmware.

http://panasonic.net/support/ (This site is in English only.)

To show the firmware version on this unit. (> 38, “System Information”)

DO NOT DISCONNECT the unit from the AC power or perform any operation while the update takes place.

After the firmware is installed, “FINISH” will be displayed on the unit’s display. Unit will restart and the following screen will be displayed.

The firmware was updated.

Current Installed Version: x.xx

OK

RETURN

≥You can perform update anytime by selecting “Firmware Update” in the Setup menu. (> 38)

≥Downloading will require several minutes. It may take longer or the Internet may not be connected depending on the connection environment.

≥If you do not want to check for the latest firmware version, set “Automatic Update Check” to “Off”. (> 38)

VQT2M13

21