Main unit (Front)
e.g., [BT730]
1 2
POWER
3 |
iPod |
4 5
VOLUME OPEN/CLOSE
Pull open.
Getting started
SD CARD | SETUP MIC | SELECTOR |
|
67
1Standby/on switch (POWER Í/I) (> 19)
Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.
2Power indicator
The indicator lights when this unit is turned on.
3Connect iPod/iPhone (> 32)
4Adjust the volume of the main unit
5Open or close the disc tray (> 22)
6Disc tray
7SD card slot (> 22)
8[BT730] [BT330] Connect Auto speaker setup microphone
8 | 9 | 10 11 | 12 | 13 |
9Display (FL display)
≥“SRD” (SURROUND) lights when sound is output to the surround speakers.
≥The display is turned off when the volume is adjusted to “0”. (> 37)
10Remote control signal sensor Distance: Within approx. 7 m (23 ft.)
Angle: Approx. 20o up and down, 30o left and right
11Select the source (> 23)
12Stop (> 25)
13Start play (> 25)
∫If the front cover comes off
1 Hold rear side of main unit by one hand and match up left or right side protruding hook on the cover first with the corresponding slot on the unit.
2 Push the hook firmly towards the unit until it clicks into place. Then push the succeeding hooks one by one until all have clicked into place.
3 Check that the cover now moves correctly.
≥ If it does not, remove it and repeat the above procedure.
Main unit (Rear)
e.g., [BT730]
1 2
AC IN | + |
|
6 5 2 1
6 | 6 | R 3 L |
SUBWOOFER CENTER FRONT
3 | 4 |
| 5 |
|
|
| 6 | 7 |
|
|
|
|
|
|
| DIGITALI I AUDIOIOININ | |
|
|
|
|
|
|
| OPTICALL |
|
|
|
|
| L | 1 | 2 | ||
|
|
|
|
| ||||
|
|
| AV |
|
|
|
|
|
|
|
| OUT |
|
|
|
|
|
|
|
|
|
|
| R |
|
|
| WIRELESSI SS | LAN | (ARC) | VIDEO | AUX | FM ANT |
| |
| LAN | RÉSEAULANLOCAL | OUT |
| (75 ) |
| ||
8
DIGITAL TRANSMITTER
9 | 10 11 |
1AC IN terminal (> 18)
2Speaker terminals (> 13)
3Cooling fan
4USB port for optional wireless adaptor (> 17)
5HDMI AV OUT terminal (> 15)
6FM radio antenna terminal (> 16)
7DIGITAL AUDIO IN terminals (> 14 , 15)
Terminal 1 is designated for connection with the TV. Terminal 2 can be used with equipment other than the STB.
8Digital transmitter dock (> 16)
9LAN port (> 17)
10VIDEO OUT terminal (> 14)
11AUX terminal (> 14)
Saving energy
This unit is designed to conserve its power consumption and save energy.
≥This unit will automatically turn to standby mode after 30 minutes if it is inactive.
VQT2M13
7
