Panasonic SC-BTT190 Settings, Easy Setting, Easy Network Setting, ∫“Wired” connection, started

STEP 5: Settings

Easy Setting

After connecting your new home theatre for the first time and pressing [Í], a screen for the basic

Select “Search for wireless network” or “WPS (PUSH button)” and press [OK], then follow the on-screen instructions and apply the settings.

Wireless Settings

started

settings will appear.

Preparation

Turn on the television and select the appropriate video input on the television.

1 Press [Í].

Setup screen appears.

2 Follow the on-screen instructions and apply the settings.

Select a connection method to wireless access point. Please refer to the operating instructions of your wireless access point about connection methods.

Search for wireless network

WPS (PUSH button)

WPS (PUSH button):

If your wireless router supports WPS (PUSH button), you can easily perform the settings by pressing WPS button on it.

e.g.,

*2

Getting

≥You can perform this setup anytime by selecting “Easy Setting” in the Setup menu. (> 35)

≥If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later via an HDMI cable, then the setting information on the TV is acquired by this unit.

Easy Network Setting

After completing “Easy Setting”, you can perform “Easy Network Setting”.

Select “Wired” or “Wireless” and press [OK].

Easy Network Setting

Select a connection mode.

Current setting : Wired

LAN cable connection:

Connect a LAN cable to the unit and select "Wired."

Wireless LAN connection:

Connect the Wireless LAN Adaptor (DY-WL5) to the USB port and select "Wireless."

Wired

Wireless

OK

RETURN

∫“Wired” connection

Follow the on-screen instructions to make your connection settings.

∫“Wireless” connection

Before beginning wireless connection setup

≥Obtain your network name (SSID*1).

≥If your wireless connection is encrypted, please be sure that you know your encryption key.

≥If “Wireless LAN Adaptor is not connected.” is displayed, check that the Wireless LAN Adaptor is fully inserted. Alternatively, disconnect and reconnect it. If there is still no change in the display, consult your dealer for advice.

WPS (Wi-Fi Protected SetupTM) is

a standard that facilitates settings relating to the connection and security of wireless LAN devices.

1Press WPS button or corresponding button of the wireless router until the lamp starts flashing.

≥ For details, refer to the operating instruction

of the wireless router.

2Press [OK].

Search for wireless network:

≥When you select “Search for wireless network”, the available wireless networks will be displayed. Select your network name and press [OK].

–If your network name is not displayed, search again by pressing the red button on the remote control.

–Stealth SSID will not be displayed when you select “Search for wireless network”. Enter manually by using “Manual setting”.

(Press [HOME] > select “Others” > [OK] > select “Setup” > [OK] > select “Network” > [OK] > select “Network Settings” > [OK] > select “Wireless Settings” > [OK] > select “Connection Setting” > [OK] > select “Manual setting” > [OK])

≥If your wireless network is encrypted, Encryption Key input screen will be displayed. Input the encryption key of your network.

VQT4D57 15