Panasonic SC-BTT190 manual Speaker settings, Adjusting speaker level, Delay time

Speaker settings

			
	ms	C	dB	R
L	0.0		0

Complete		dB
Test		0
		SW
	ms	dB
dB
0	0.0	0
LS		RS

AVolume (Channel balance)

BDelay time for the Centre speaker C Delay time for the Surround speakers

∫Adjusting speaker level

(Effective when playing multi-channel audio)

1Select “Test” and press [OK]. A test signal is output.

2While listening to the test signal

Press [3, 4] to adjust the volume of each speaker ( dB0 ).

The volume can be adjusted between r6 dB to s6 dB.

≥Set each speaker level according to the volume of the Front (L) and Front (R) speaker volume respectively.

3Press [OK].

The test signal stops.

∫Delay time

For optimum listening with 5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position.

If either distance 1 or 2 is less than 3, measure the distance and adjust the time to make up for the difference (see the table below).

C : A

L C R

	1	3	: B
		SW
		2
LS		RS
LS		RS

1 2 3: Primary listening distance

AActual speaker position B Ideal speaker position

1Press [3, 4, 2, 1] to select the distance box ( ms0.0 ) and press [OK].

2Press [3, 4] to select the setting and press [OK].

Delay time for the Centre speaker

Subtract the distance 1 from 3

Distance (Approx.)	Setting
34 cm	1.0 ms
68 cm	2.0 ms
102 cm	3.0 ms
136 cm	4.0 ms
170 cm	5.0 ms
Delay time for the Surround speakers
Subtract the distance 2 from 3

Distance (Approx.)	Setting
170 cm	5.0 ms
340 cm	10.0 ms
510 cm	15.0 ms

To finish the speaker setting

Press [3, 4, 2, 1] to select “Complete” and press [OK].

Advanced operations

VQT4D57 37