∫Delay time
For optimum listening with
If either distance 1 or 2 is less than 3, measure the distance and adjust the time to make up for the difference (see the table below).
C : A
L | C | R |
| 1 | 3 | : B |
|
| ||
|
| SW |
|
|
| 2 |
|
LS |
| RS |
|
LS |
| RS |
|
Enjoying sound effects from all speakers
For more details on each setting, refer to “Audio Settings” on the Option menu(> 34)
Surround Effects
1Press [SURROUND].
2Press [3, 4] to select “MULTI CH SOURCE” or “2CH SOURCE”, and then press [OK]. e.g.,
3While the selected mode is displayed
Press [3, 4] to select the desired setting. (> 34)
1 2 3: Primary listening distance
AActual speaker position B Ideal speaker position
1Press [3, 4, 2, 1] to select the distance box ( ms0.0 ) and press [OK].
2Press [3, 4] to select the setting and press [OK].
Delay time for the Center speaker
Subtract the distance 1 from 3
Distance (Approx.) | Setting |
34 cm (1 ft. 1 in.) | 1.0 ms |
68 cm (2 ft. 2 in.) | 2.0 ms |
102 cm (3 ft. 4 in.) | 3.0 ms |
136 cm (4 ft. 5 in.) | 4.0 ms |
170 cm (5 ft. 6 in.) | 5.0 ms |
Delay time for the Surround and Surround back speakers
Subtract the distance 2 from 3
Distance (Approx.) | Setting |
170 cm (5 ft. 6 in.) | 5.0 ms |
340 cm (11 ft. 1 in.) | 10.0 ms |
510 cm (16 ft. 8 in.) | 15.0 ms |
To finish the speaker setting
Press [3, 4, 2, 1] to select “Complete” and press [OK].
∫Adjusting speaker level during
play
1Press [CH SELECT] to activate the speaker
setting mode.
2Press [CH SELECT] several times to select the speaker.
≥Press [2, 1] to adjust the balance of the front speakers.
3Press [3] (increase) or [4] (decrease) to adjust the speaker level for each speaker.
s6 dB to r6 dB
Sound Effects
1Press [SOUND].
2Press [3, 4] to select “2CH SOURCE” or “ ALL SOURCE”, and then press [OK]. e.g.,
3While the selected mode is displayed
Press [3, 4] to select the desired setting and press [OK].
Repeat this procedure if necessary. (> 34)
≥The sound effects/modes may not be available or have no effect with some sources.
≥You may experience a reduction in sound quality when these sound effects/modes are used with some sources. If this occurs, turn the sound effects/modes off.
Advanced | operations |
VQT3X49 41