Panasonic SC-BTT490 owner manual Sound, iPod/iPhone operation, Playback

Sound

No sound. Low volume. Distorted sound.

Cannot hear the desired audio type.

¾Check connections to speakers and other equipment. (> 11s17)

¾Ensure the speaker settings for your speakers are correct. (> 40)

¾To output audio from a device connected with an HDMI cable, set “HDMI Audio Output” to “On” in the Setup menu. (> 37)

¾When “BD-Video Secondary Audio” is set to “On”, Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio and DTS-HD High Resolution Audio are output as Dolby Digital or DTS Digital Surround.

¾Re-master will not work when the bitstream signal is output from the HDMI AV OUT terminal. (> 34)

¾Depending on the connected equipment, the sound may be distorted if this unit is connected with an HDMI cable.

¾The multi-channel audio from a device connected to the TV is not output in it’s original multi-channel form.

–If the device has an optical audio output terminal, connect the device to this unit’s DIGITAL AUDIO IN terminal. (> 16)

No surround sound.

¾Press [SURROUND] to select a surround effect. (> 41)

¾(When using the 7.1ch speaker system) Audio is not available from the surround back speakers (optional) even though Dolby Pro Logic II turns on.

Cannot switch audio.

¾When audio is output from the HDMI AV OUT terminal, set “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to “PCM”. (> 36)

No sound from the TV.

¾Press [EXT-IN] to select the corresponding source. (> 20)

¾When connecting the unit to a TV using an HDMI cable, check whether the HDMI terminal on the TV is labeled “HDMI (ARC)”. If not labeled in this way, connect using the HDMI cable in combination with an optical digital audio cable.(> 14)

¾If there is no sound from the equipment connected to this unit’s DIGITAL AUDIO IN terminal, please make sure that the optical audio output of the equipment is set to PCM.

Playback

Disc cannot be played.

¾The disc is dirty. (> 5)

Still pictures (JPEG) do not play back normally.

¾The images that were edited on the PC, such as Progressive JPEG, etc., may not be played back.

I can’t play back BD-Live.

¾The SD card is write-protected. (> 7)

¾Confirm that this unit is connected to the broadband Internet. (> 17)

¾Confirm the “BD-Live Internet Access” settings. (> 39)

¾Confirm an SD card is inserted into the SD card slot. (> 20)

Alternative soundtrack and subtitles cannot be selected.

¾The languages are not recorded on the disc.

¾You may not be able to use the Option menu to change the soundtrack and subtitles on some discs. Use the disc’s menus to make changes. (> 24)

iPod/iPhone operation

Cannot charge or operate.

¾Check that the iPod/iPhone is connected firmly. (> 26)

¾The battery of the iPod/iPhone is depleted. Charge the iPod/iPhone, and then operate again.

¾When unexpected operation occurs while using the iPod/iPhone, connect the iPod/iPhone again or try to restart the iPod/iPhone.

Cannot display iPod/iPhone videos/photos on the TV.

¾Make sure that TV is connected to the VIDEO OUT terminal on this unit. (> 15)

¾Operate the iPod/iPhone menu to make the appropriate video/photo output settings for your TV. (Refer to operating instructions for your iPod/iPhone.)

The TV input channel unintentionally changes to HDMI input.

¾When the main unit is connected with an “HDAVI Control” compatible TV and VIDEO IN is selected for iPod/iPhone video or photo playback, the TV input channel will automatically change to the HDMI input channel when [HOME] is pressed.

–Re-select the TV’s VIDEO IN input channel.

46 VQT3X49