Front speaker assembly option
It is possible to shorten the height of the front speaker by directly connecting the speaker to the base without using the stand.
Preparation
Detach the speaker cable from the stand.
1 Thread the detached cable through the base.
2 Attach the speaker to the base and tighten the screw (supplied) securely.
3 Connect the speaker cable to the speaker and to the terminal of the main unit.
(> 12, 13)
∫Reattaching the speaker cable to the stand
Straighten the |
|
cable and run | Pull out the |
through the | cable through |
stand. | the hole. |
Preventing the speakers from falling or dropping
Preventing from falling
Front speaker
Preventing from dropping
Front speaker, Surround speaker, Center speaker
1 Thread a string to the speaker.
≥Use a string of less than ‰ 2.0 mm (3/32q), which is capable of supporting over 10 kg
(22 lbs). e.g., Front speaker
AString (not supplied) B Rear of the speaker
2 Thread a string from the wall to the speaker and tie tightly.
When placed on the floor
When mounted on a wall
CScrew eye (not supplied) D Wall
E Approx.150 mm (5 29/32q) F Less than 100 mm (3 15/16q)
Advanced | operations |
VQT3X49 43