∫Unit Settings
Press [OK] to show the following settings:
¾Front Panel Display
Changes the brightness of the unit’s display.
≥If “Auto” is selected, the display is set to bright and only dimmed during playback.
¾Edit User Information
Change the user information registered in the Home menu.
∫Quick Start
Speed of startup from power off is increased.
≥When set to “On”, the internal control unit will be powered and the idle power consumption will increase compared to when set to “Off”. (About the power consumption > 49)
∫Remote Control Code
Change the remote control code if other Panasonic products react to this remote control.
∫Firmware Update (> 19)
Press [OK] to show the following settings:
¾Automatic Update Check
When this equipment remains connected to the Internet, it will check for the latest firmware version when it is turned on and you can update it if necessary.
¾Update Now
You can update the firmware manually if a firmware update is available.
∫System Information
Press [OK] to show the following settings:
¾License
Information about the software used by this unit is displayed.
¾Firmware Version Information Display firmware version of this unit and wireless LAN module.
∫Restore Default Settings
This returns all values in the Setup menu and the Option menu to the default settings, except for some settings of network, ratings, remote control code, language, etc.
Speaker settings
|
|
| |
|
| ms | C | dB | R |
L | 0.0 | 0 |
Complete |
| dB |
Test |
| 0 |
| SW | |
| ms | dB |
dB | ||
0 | 0.0 | 0 |
LS |
| RS |
AVolume (Channel balance)
BDelay time for the Center speaker
CDelay time for the Surround and Surround
back speakers*
* Surround back speakers: optional (> 10)
∫Adjusting speaker level
(Effective when playing
1Select “Test” and press [OK]. A test signal is output.
2While listening to the test signal
Press [3, 4] to adjust the volume of each
speaker ( dB0 ).
The volume can be adjusted between r6 dB to s6 dB.
≥Set each speaker level according to the volume of the Front (L) and Front (R) speaker volume respectively.
3Press [OK].
The test signal stops.
40 VQT3X49
