Panasonic SC-BTT560 SC-BTT500 SC-BTT460 SC-BTT400 Settings, Easy Setting, Easy Network Setting

STEP 5: Settings

Easy Setting

After connecting your new home theatre for the first time and pressing [Í], a screen for the basic settings will appear.

Preparation

Turn on the television and select the appropriate video input on the television.

1 Press [Í].

Setup screen appears.

2 Follow the on-screen instructions and apply the settings.

≥You can perform this setup anytime by selecting “Easy Setting” in the Setup menu. (> 41)

≥If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later via an HDMI cable, then setting information on the TV such as “On-Screen Language” is acquired by this unit.

Easy Network Setting

After completing “Easy Setting”, you can perform “Easy Network Setting”.

Select “Wired” or “Wireless” and press [OK]. e.g., [BTT560] [BTT500]

Easy Network Setting

Select a connection mode.

Current setting : Wired

Wired

Wireless

OK

RETURN

∫“Wired” connection

Follow the on-screen instructions to apply your connection settings.

∫“Wireless” connection

Before beginning wireless connection setup

≥Obtain your network name (SSID*1).

≥If your wireless connection is encrypted, please be sure that you know your encryption key.

≥[BTT460] [BTT400]

If “Wireless LAN Adaptor is not connected.” is displayed, check that the Wireless LAN Adaptor is fully inserted. Alternatively, disconnect and reconnect it. If there is still no change in the display, consult your dealer for advice.

Select “Search for wireless network” or “WPS (PUSH button)” and press [OK], then follow the on-screen instructions and apply the settings.

Wireless Settings

Select a connection method to wireless access point. Please refer to the operating instructions of your wireless access point about connection methods.

Search for wireless network

WPS (PUSH button)

WPS (PUSH button):

If your wireless router supports e.g., WPS (PUSH button), you can

easily perform the settings by pressing WPS button on it.

*2

WPS (Wi-Fi Protected SetupTM) is

a standard that facilitates settings relating to the connection and security of wireless LAN devices.

1Press WPS button or corresponding button of the wireless router until the lamp starts

flashing.

≥For details, refer to the operating instruction of the wireless router.

2Press [OK].

Search for wireless network:

≥When you select “Search for wireless network”, the available wireless networks will be displayed. Select your network name and press [OK].

–If your network name is not displayed, search again by pressing the red button on the remote control.

–Stealth SSID will not be displayed when you select “Search for wireless network”. Enter manually by using “Manual setting”.

Press [HOME]

>select “Others” and press [OK]

>select “Setup” and press [OK]

>select “Network” and press [OK]

>select “Network Settings” and press [OK]

>select “Wireless Settings” and press [OK]

>select “Connection Setting” and press [OK]

>select “Manual setting” and press [OK]

≥If your wireless network is encrypted, Encryption Key input screen will be displayed. Input the encryption key of your network.

20 VQT4Q16