Listening to the Radio
You can preset up to 30 channels.
Preparation
Make sure that the FM antenna is connected. (> 16)
Presetting stations automatically
1 Press [RADIO] to select “FM”.
2 Press and hold [STATUS] to select “LOWEST” or “CURRENT”.
LOWEST
To begin auto preset with the lowest frequency (FM87.50).
CURRENT
To begin auto preset with the current frequency.*
*To change the frequency, refer to “Manual tuning and presetting”.
3 Press and hold [OK].
Release the button when “AUTO” is displayed.
The tuner starts to preset all the stations it can receive into the channels in ascending order.
Listening to a preset channel
1 Press [RADIO] to select “FM”.
2 Press the number buttons to select the channel.
To select a
To select a
Alternatively, press [W, X] or [3, 4].
∫Manual tuning and presetting
Select a radio broadcast.
1 Press [RADIO] to select “FM”.
2 Press [SEARCH6] or [SEARCH5] to
select the frequency.
≥To start automatic tuning, press and hold [SEARCH6], [SEARCH5] until the frequency starts scrolling. Tuning stops when a station is found.
To preset the channel
3While listening to the radio broadcast
Press [OK].
4While “P” is flashing on the display Press the number buttons to select the channel.
≥A station previously stored is overwritten when another station is stored in the same channel preset.
≥The radio settings will be shown on the unit's display. (Some settings are also indicated on the TV screen.)
∫RDS broadcasting
If the station you are listening to is transmitting RDS signals, programme service or programme type can be shown on the display.
While listening to the radio broadcast
Press [STATUS] to display the text data.
PS: Programme service
PTY: Programme type
OFF: Frequency display
TV & Radio
VQT4Q16 31
