Panasonic SC-BTT560 SC-BTT500 SC-BTT460 SC-BTT400 manual Sound, Playback, No surround sound

Sound

No sound. Low volume. Distorted sound.

Cannot hear the desired audio type.

¾Check connections to speakers and other equipment. (> 13s19)

¾Ensure the speaker settings for your speakers are correct. (> 43)

¾To output audio from a device connected with an HDMI cable, set “HDMI Audio Output” to “On” in the Setup menu. (> 39)

¾When “BD-Video Secondary Audio” is set to “On”, Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio and DTS-HD High Resolution Audio are output as Dolby Digital or DTS Digital Surround.

¾Re-master will not work when the bitstream signal is output from the HDMI AV OUT terminal. (> 36)

¾Depending on the connected equipment, the sound may be distorted if this unit is connected with an HDMI cable.

¾The multi-channel audio from a device connected to the TV is not output in it’s original multi-channel form.

jIf the device has an optical audio output terminal, connect the device to this unit’s DIGITAL AUDIO IN terminal. (> 17)

No surround sound.

¾Press [SURROUND] to select a surround effect. (> 44)

¾[BTT560] [BTT500]

(When using the 7.1ch speaker system) Audio is not available from the surround back speakers (optional) even though Dolby Pro Logic II turns on.

Cannot switch audio.

¾When audio is output from the HDMI AV OUT terminal, set “Dolby D/Dolby D +/Dolby TrueHD”, “DTS/DTS-HD” or “MPEG Audio” to “PCM”. (> 38)

No sound from the TV.

¾Press [EXT-IN] to select the corresponding source. (> 22)

¾When connecting the unit to a TV using an HDMI cable, check whether the HDMI terminal on the TV is labelled “HDMI (ARC)”. If not labelled in this way, connect using the HDMI cable in combination with an optical digital audio cable. (> 16)

¾If there is no sound from the equipment connected to this unit’s DIGITAL AUDIO IN terminal, please make sure that the optical audio output of the equipment is set to PCM.

Playback

Disc cannot be played.

¾The disc is dirty. (> 6)

¾The disc is not finalized. (> 8)

Still pictures (JPEG) do not play back normally.

¾The images that were edited on the PC, such as Progressive JPEG, etc., may not be played back.

I can’t play back BD-Live.

¾The SD card is write-protected. (> 8)

¾Confirm that this unit is connected to the broadband Internet. (> 18)

¾Confirm the “BD-Live Internet Access” settings. (> 41)

¾Confirm an SD card is inserted into the SD card slot. (> 22)

Alternative soundtrack and subtitles cannot be selected.

¾The languages are not recorded on the disc.

¾You may not be able to use the Option menu to change the soundtrack and subtitles on some discs. Use the disc’s menus to make changes. (> 26)

48 VQT4Q16