Getting started
17
VQT3X51
Inserting or removing
media
≥When inserting a media item, ensure that it is
facing the right way up.
≥When removing the SD card, press the center
of the card and pull it straight out.
≥If you connect a Panasonic product with a USB
connection cable, the setup screen may be
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
≥
Use the front USB port when you connect a
iPod/iPhone, USB memory or a USB HDD. The
USB port on the rear panel is for the
Communication Camera and the Wireless LAN
Adaptor DY-WL5 (optional).
Enjoying TV with unit’s
speakers
1Connect the TV and the main unit. (>12)
2Press [EXT-IN] several times to select the
appropr iate external input mode.
(
>18)
≥Reduce the volume on the TV to its
minimum, and then adjust the volume of the
main unit.
1Press and hold [jAUDIO] to activate the
audio se tting mode.
2Press [jAUDIO] several times to select
the audio. (MAIN, SAP)
≥Set
“
PCM-FIX
” (
>33)
to “O f f
”.
≥
“SAP” (
Secondary Audio Program
) only
works with
Dolby Dual Mono.
≥You cannot change the audio type when the TV is
connected to this unit via the AUX terminal.
SD CARD
iPod
VOL
OPEN/CLOSE
*
* (For details >22)
Selecting the type of audio
SC-BTT190P_eng.book 17 ページ ２０１２年２月２０日 月曜日 午後５時５分