32 VQT3X51
¾HDMI Resolution
The items supported by the connected devices are
indicated on the screen as “
¢
”. When any item
without “
¢
” is selected, the images may be distorted.
≥If “Auto” is selected, the best suited output
resolution to the connected television is
automatically selected.
≥To enjoy high-definition video up-converted to
1080p, you need to connect the unit directly
to 1080p compatible HDTV (High Definition
Television). If this unit is connected to an
HDTV through other equipment, the other
equipment must also be 1080p compatible.
¾24p Output
When this unit is connected to a TV supporting 1080/
24p output using an HDMI cable, movies and other
material recorded at 24p are output at 24p.
≥
When playing DVD-Video, set to “On” and then set
“24p” in “Video Settings” (
>
29) to “On”.
≥When BD-Video images other than 24p are
played, images are output at 60p.
≥
24p: A progr essive imag e recorded at a rate of 24
fram es per second (motion-pictur e film). Many
BD-Vid eo movi e contents are recorded in 24 fr ames/
second in accordance with the film materials.
¾HDMI Color Mode
This setting is for selecting color-space
conversion of the image signal when the unit is
connected using an HDMI cable.
¾Deep Color Out put
This setting is for selecting whether to use Deep
Color output when a television that supports
Deep Color is connected.
¾Conte nts Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
∫Still Mode (paused video)
Select the type of picture shown when you pause
playback.
∫Seamless Play
The chapter segments in playlists are played
seamlessly.
≥Select “On”, when the picture freezes for a
moment at the chapters segment in playlists.
∫Surround Effects (>30)
∫Sound Effects (>30)
∫Dynamic Range Compression
You can listen at low volumes but still hear dialog
clearly.
(Dolby Digital, Dolby Digital P lus and Dolby
TrueHD only)
≥
“Auto” is effective only when playing Dolby TrueHD.
∫Dig ital A udio O utput
Press [OK] to show the following settings:
¾Dolby D/Dolby D +/Dolby T r ueHD
¾DTS/DTS-HD
Select the audio signal to output.
≥
Select “PCM”, when the connected equipment
cannot decode the respective audio fo rmat.
This unit decodes the audio format and
transmits to the connected equipment.
≥
Not making the proper settings may result in noise.
¾BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click sound).
If “Off” is selected, the unit outputs the primary audio only.
Auto Automatically selects the type of
picture shown.
Field Select if jittering occurs when “Auto” is
selected.
Frame
Select if small text or fine patt erns cannot
be seen clearly when “Auto” is selected.
Audio
SC-BTT190P_eng.book 32 ページ ２０１２年２月２０日 月曜日 午後５時５分