Advanced
operations
39
VQT3X51
[BTT196] [BTT195]
It is possible to shorten the height of the front
speaker by directly connecting the speaker to the
base without using the stand.
Preparation
Detach the speaker cable from the stand.
1Thread the det ached cable through the
base.
2Att ach the speaker to the base and tighten
the screw (supplied) securely.
3Connect the speaker cable to the speaker
and to the terminal of the main unit.
(>11, 12)
∫Reattaching the speaker cable
to the stand
[BTT196] [BTT195] Preventing from falling
Front speaker
Preventing from droppi ng
Front speaker, Surround speaker, Center speaker
1Thread a string to the speaker.
≥Use a string of less than ‰ 2.0 mm (3/32q),
which is capable of supporting over 10 kg
(22 lbs).
e.g., [BTT196] Front speaker
AString (not supplied)
BRear of the speaker
2Thread a string from the wall to the
speaker and tie tightly.
CScrew eye (not supplied)
DWall
EApprox.150 mm (5 29/32q)
FLess than 100 mm (3 15/16q)
Front speaker assembly option
S traighten the
cable and run
through the
stand.
Pull out the
cable through
the hole.
Preventing the speakers
from falling or dropping
When mounted on a wall
When placed on the floor
SC-BTT190P_eng.book 39 ページ ２０１２年２月２０日 月曜日 午後５時５分