TV & RadioReference
Advanced
operations
25
VQT3X51
Listening to the Radio
You can preset up to 30 channels.
Preparation
Make sure that the FM antenna is connected.
(>13)
1Press [RADIO] to select “FM”.
2Press and hold [STATUS] to select
“LOWEST” or “CURRENT”.
LOWEST:
To begin auto preset with the lowest
frequency (FM87.9).
CURRENT:
To begin auto preset with the current
frequency.*
* To change the frequency, refer to “Manual
tuning and presetting”.
3Press and hold [OK].
Release the button when “AUTO” is
displayed.
The tuner starts to preset all the stations it
can receive into the channels in ascending
order.
1Press [RADIO] to select “FM”.
2Press the number buttons to select the
channel.
To select a 1-digit number
e.g., 1: [1] B[OK].
To select a 2-digit number
e.g., 12: [1] B[2].
Alternatively, press [W,X] or [3,4].
∫Manual tuning and presetting
Select a radio broadcast.
1Press [RADIO] to select “ FM”.
2Press [SEARCH 6] or [SEARCH5] to
select the frequency.
≥To start automatic tuning, press and hold [SEARCH6],
[SEARCH5] until the frequency starts scrolling. Tuning
stops when a station is found.
To preset the channel
3While listening to the radio broadcast
Press [OK ].
4
While “P” is flashing on the display
Press the number buttons to select the channel.
≥A station previously stored is overwritten when another
station is stored in the same channel preset.
≥The radio settings will be shown on the unit's display.
(Some settings are also indicated on the TV screen.)
Presetting stations
automatically
Listening to a preset
channel
SC-BTT190P_eng.book 25 ページ 2012年2月20日 月曜日 午後5時5分