3 Viewing Camera Images
60
Registering the Home Position/Se nsor Position
1. Using the navigator keys, pan and tilt the lens and aim it at the desired home
position.
2. To register the current position as the home position, hold the [ENTER] for
about 5 seconds. Press and hold [9] to register the current position as the
sensor position.
• A confirmation screen will appear.
Home Position Confirmation Screen
Sensor Position Confirmation Screen
3. Select [Yes] and press [ENTER] to confirm.
Note
• Use of the home and sensor positions stores data to the camera. When
multiple users are using the cameras, only the data for the last registration
will remain valid; other users can overwrite registered positions.
• You cannot set a camera so that its lens does not move to the sensor
position when the camera’s sensor is activated.
• Registering the home position and/or sensor position will also register the
brightness and white balance settings (see page124) at the time of the
registration.
Registering the Preset Keys
The camera’s display positions can be regist ered to correspond to numbers of the
remote control keypad.
1. Using the navigator keys, pan and tilt the lens and aim it at the position you
would like to register to a preset key.
2. Hold the desired preset key number key ([1] to [8]) for roughly 5 seconds.
• A confirmation screen will appear.
• The currently set name for the preset will appear.