Panasonic BL-WV10A operating instructions Viewing Camera Images

3Viewing Camera Images

3Viewing Camera Images

Once Quick Setup is complete, set the mode switch on the back of the unit to [NORMAL], disconnect the DC plug from the back of the unit, then reconnect it. After the unit starts up, the camera image will be displayed.

Note

•Frame rate (frames per second, “fps”) may vary depending on the image being viewed by the camera, brightness, and other environment conditions, as well as network conditions such as distance between the BL-WV10A and the cameras, the number of cameras connected, network traffic, wireless network conditions (see page 6), etc.

•For BL-C10A and BL-C30A, a maximum of 15 fps in LOW quality (resolution) and 7.5 fps in HIGH quality is possible (see page 124).

•For HCM series cameras, a maximum of 30 fps in LOW quality and 12 fps in HIGH quality is possible (see page 124).

•Network speed may decrease while the BL-WV10A is turned on and connected to cameras.

•The display size and brightness of the Monitoring Screen can be adjusted (see page 122).

54