Panasonic BL-WV10A operating instructions For assistance, please call

2 Connecting Cameras

Note

•If a user name and password has already been established for a camera, Quick Setup will be unable to replace that data with the user name and password for the BL-WV10A.

To register the camera as a local camera, reset the camera by pressing its FACTORY DEFAULT RESET button before connecting it.

•Quick Setup can take place within 20 minutes after the camera is turned on. If the camera is not recognized, or if [Restarting camera] is displayed at the bottom of the screen for more than 2 minutes without camera registration beginning, reset the camera by pressing its FACTORY DEFAULT RESET button and reconnect the camera.

•If a camera needs to be restarted during Quick Setup, camera configuration and restart will take about 2 minutes.

•During Quick Setup, the wireless indicator will light in green.

•Once registration is complete, the buzzer will sound and the wireless indicator will flash green.

When camera registration is complete, [Finished] is displayed.

3.To register an additional camera, connect the Ethernet cable to the new camera and turn the camera on.

•When registration is complete, the buzzer will sound and the wireless indicator will flash once for each of the cameras registered.

[For assistance, please call: 1-800-272-7033] 27