3Viewing Camera Images

Sensor Notification Screen

If a camera sensor detects motion when Sensor Alert mode is on, the Monitoring Screen switches to the relevant camera, and that camera lens moves to the sensor position. The sensor position is set as indicated on page 60.

Note

After the Sensor Notification Screen is displayed, the camera is set to repeat sensor responses every several seconds, and those responses will not be displayed. The sensor must go for roughly 5 seconds without activation. If another camera’s sensor is triggered, however, the display will switch to that camera.

If a camera's sensor triggers Sensor Alert mode, the camera's image will not be displayed if:

-The TV's video input is not set to the input which the BL-WV10A is connected to

-You are currently recording a camera image (using standard recording)

-You are accessing the [Sensor Alert] or [Setup] screen.

-You are taking a snapshot

-You have set the timer record or sensor record feature.

In these situations, you will still be alerted to sensor detection by the flashing of the sensor indicator and by the buzzer, if you have the buzzer turned on.

When viewing the television, you cannot switch to a sensor-activated screen. Press [INPUT] on the remote control to switch to the camera Monitoring Screen.

The buzzer volume can be adjusted (see page 97).

If you have hidden the camera's image (see page 56), the camera's image will be displayed if the sensor is triggered.

68

Page 68
Image 68
Panasonic BL-WV10A operating instructions Sensor Notification Screen