2Connecting Cameras

2.2.5Placing Cameras

Place cameras after confirming the camera image (see page 28).

1.Disconnect the cameras and place them where you wish to use them.

Refer to page 6 in this manual as well as the Operating Instructions included with the camera for proper placement.

2.Connect all wired cameras to the BL-WV10A.

3.Set the mode switch on the back of the BL-WV10A to [NORMAL] and turn it on.

4.Turn on the cameras.

5.Confirm that each camera can be accessed by the BL-WV10A.

Camera information can be displayed by pressing [DISPLAY] while monitoring a camera. When placing a wireless camera, refer to the signal strength displayed on-screen for optimum transmission quality. Transmission problems can result in connection faults and problems when monitoring the camera.

Signal strength

Strongest signal

Weakest signal

No signal

30

Page 30
Image 30
Panasonic BL-WV10A operating instructions Placing Cameras