Panasonic BL-WV10A operating instructions Date and Time, When Connected to a Router

6Setup Menu

6.1Date and Time

The BL-WV10A receives date and time information from registered and connected cameras each time it starts up. In addition, the internal clock can sometimes speed up or slow down based on environment temperatures. If the time displayed is off, the date and time can be set manually.

1.Select [Date and Time] from the [Setup] screen (see page 95) and press [ENTER].

• The Clock Settings screen appears.

2.Use the left and right navigator keys to select the desired information, then press the top or bottom navigator keys to change the setting and press [ENTER].

•When you set the time manually, the clocks of all connected local cameras will be synchronized to match.

Note

•The BL-WV10A will be unable to receive time data if no cameras are connected when it starts up. In that instance, set the clock manually.

•If [DST] is turned on, the BL-WV10A will automatically adjust its clock for Daylight Saving Time. The clock will move forward 1 hour at 2:00 AM on the first Sunday in April, and will move back 1 hour at 3:00 AM on the last Sunday in October.

When Connected to a Router

•Time data can be obtained from remote cameras, but that data will not overwrite settings in the BL-WV10A. The time displayed while monitoring and the time used for recording purposes is taken from the BL-WV10A's clock. If the time in a remote camera is off, connect to it with a computer and reset its clock to match that of the BL-WV10A.

96