Panasonic BL-WV10A operating instructions Adding Cameras

10 Adding Cameras

•When registration is complete, the buzzer will sound and the wireless indicator will flash once for each of the cameras registered.

When camera registration is complete, [Finished] is displayed.

•The Quick Setup screen will appear differently based on the network on which it is used.

•The camera can also be registered manually (see page 105). However, any additional cameras will be registered as remote cameras.

Note

•To add more cameras, connect the Ethernet cable to the camera to be added, and re-perform step 2.

3.Once all of the cameras have been registered as in step 2, set the mode switch on the back on the BL-WV10A to [NORMAL], turn the BL-WV10A off and then turn it back on again.

4.Confirm the camera images.

•Place the cameras after confirming that they display images correctly.

[For assistance, please call: 1-800-272-7033] 133