Notice Regarding Battery Safety

1.Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed. If electrolyte comes in contact with the eyes, flush eyes with water.

2.Do not mix old and new batteries.

3.Do not heat or expose to flame.

4.Do not take apart or short circuit.

5.Do not attempt to recharge alkaline or manganese batteries.

6.Remove if the remote control is not going to be used for a period of time. Store in a cool, dark place.

7.Use only non-rechargeable AA batteries. When replacing the batteries, we recommend using the same type of Panasonic batteries that are included with this product. See the Setup Guide for more information.

Notice Regarding Wireless Communications

1.To avoid wireless communication interference and instability, do not use this product near the following devices.

Wireless transmitters (radio transmitters, cellular transmitters, etc.)

Wireless devices which operate at 2.4 GHz (security equipment, POS systems, cordless telephones, etc.)

Microwave ovens

2.Wireless communication range and quality may be affected if the following types of objects are located between or near this product and other wireless devices connected to this product. In the event that images do not refresh at a regular rate, become cut off, etc., relocate this product, the other wireless devices, or the obstacles (if possible) for more stable wireless communications.

Metal door shutters

Walls made of concrete, stone, or brick, or walls which contain aluminium- based heat insulation

Multiple walls

Fire doors and glass

Steel racks or shelves

3.Place cameras and this product at least 2 m (6.5 ft.) away from radios. Do not connect cameras and this product to a power outlet used by a radio.

6

Page 6
Image 6
Panasonic BL-WV10A operating instructions