Panasonic BL-WV10A operating instructions Quick Setup

		16 Troubleshooting the BL-WV10A
16.6 Quick Setup
	Issue	Causes and Solutions
	The camera cannot be set	Are you attempting to perform Quick Setup on a
	as a local camera.	camera already configured using a computer?
		• To use Quick Setup to set cameras already
		configured on a computer as local cameras,
		you need to set the administrator name and
		password in Basic Settings to have the same
		values as those of the camera you wish to
		perform Quick Setup on.
		Is the firmware version of the camera out of date?
		• For the BL-C10A and BL-C30A, the firmware
		version must be 1.22 or higher.
		• For HCM series cameras, the firmware
		version must be 1.08 or higher.
		Does the camera support local camera
		registration?
		• Cameras with a zoom feature cannot be
		registered as local cameras.
		Cameras that have been registered as remote
		cameras cannot be re-registered as local
		cameras even after re-initializing.
		• In the Camera Setup screen in normal mode,
		erase the camera, then re-initialize it, and
		then perform Quick Setup.
		When performing Quick Setup on cameras when
		2 BL-WV10As are in use, those for one of the BL-
		WV10As will be registered as local cameras, but
		those for the other BL-WV10A will be registered
		as remote cameras.
		• First, make sure that the administrator name
		and password for the cameras is identical on
		both BL-WV10As. Next, connect the cameras
		to each BL-WV10A prior to connecting the
		BL-WV10As to each other.

[For assistance, please call: 1-800-272-7033] 151