Panasonic BL-WV10A Setting Description White Balance, Auto Return, Refresh Rate, Image Quality

6 Setup Menu

Setting	Description
White Balance	Choose from Auto, Incandescent, Fluorescent 1, Fluorescent
	2, Outdoor, or Manual *1.
Auto Return	Choose either none or a duration between one and thirty
	minutes. For the camera in question, if no operation occurs
	during the specified time, the sensor position will move to the
	lens direction. It can be set to automatically move to the lens
	direction for Sensor Alert and sensor recording.
Refresh Rate	Choose an interval to refresh the monitoring image from
	among motion, 3s, 5s or 10s. When publishing the camera
	externally, this setting can be used to avoid an excessive
	invasion of privacy. If the update interval is set to a value other
	than motion, image recording can occur for a longer period of
	time as a result.
Image Quality	The quality of the monitored image can set to the standard
	setting, or to favor either clarity or motion.

*1 When selecting [Manual] for the white balance value, the white balance value you choose will be maintained. Any setting other than manual will be constantly adjusted by the camera. If the color balance seems odd during monitoring, wait until a predominantly white image appears well before selecting manual.

Note

•When registering a preset, the white balance and brightness settings used at the time of registration will also be saved. This settings will be effective when the camera moves to the preset position.

110