Panasonic BL-WV10A operating instructions Changing the Order of the Camera List

6 Setup Menu

Note

•If turning the timer off by pressing [TIMER] does not cancel the timer recording, the camera cannot be erased.

When the camera is used for Sensor Alert:

“This camera is used for Sensor Alert mode. Set Sensor Alert to [-] on the [Camera Sensors] screen.”

Deactivate the camera for Sensor Alert mode as explained in the error message and then try erasing the camera.

6.6Changing the Order of the Camera List

1.Select [Camera Setup] from the [Setup] screen (see page 95) and press [ENTER].

2.To move a camera up in the list, select it and press [2].

3.To move a camera down in the list, select it and press [3].

Note

•The order of the cameras displayed in the Camera List in normal mode and the order of cameras displayed in the Quick Setup screen are controlled separately. The order of cameras displayed in the Quick Setup screen when adding cameras is not the same as ordered in the Camera List.

[For assistance, please call: 1-800-272-7033] 119