Panasonic BL-WV10A operating instructions SD Memory Card Error Messages

	15 Error Messages
Error Message	Causes and Solutions
Sequential Display mode	This error is displayed when the remote control is
is active.	used during Automatic Display Mode.
Set mode switch on back	• Set the mode switch on the back of the device
of unit to [NORMAL], then
	to Normal and turn the power on again.
turn unit off/on.
SD Memory Card Error Messages
Error Message	Causes and Solutions
SD Memory Card is	This error is displayed when an SD memory
locked.	card's write-protection is on.
Unlock the SD Memory	• Turn the write-protection off.
Card and try again.
No SD Memory Card.	This error appears if an SD memory card has not
Insert card and try again.	been inserted.
	• Insert an SD memory card.
SD Memory Card is full.	This error is displayed if there is no free space on
	the SD memory card.
	• Insert a blank SD memory card, or erase
	unneeded data from it.
Cannot use this SD	This error appears when an SD memory card not
Memory Card.	recognized by the BL-WV10A is used.
	• Use a recognizable SD memory card or
	format it using the BL-WV10A (see
	page 120).
Could not format.	This error appeals when memory card formatting
	fails.
	• Re-format the card. If that fails to correct the
	problem, use a different SD memory card.

[For assistance, please call: 1-800-272-7033] 145